Abstract:As part of the zinc hydrometallurgy plant, the iron removal process is a complex system with four cascaded reactors. Tighter process-index control is difficult to achieve due to the complicated, long, and time-varying removal process. The control performance is also affected by the quality of the ore source and external disturbances. Little research is documented in the literature to address these difficulties and manual control is widely used. An innovative hybrid control strategy is developed to control the iron removal process indices within narrow ranges with minimum cost of additive regents, including oxygen and zinc oxide. This strategy is composed of an optimal setting model, a model-based optimal controller, an integrated prediction model, a fuzzy-logic-based feedforward compensator, and a model feedback adjustor. The optimal setting model automatically optimizes the set-points of the process indices under different production conditions. To achieve the process requirements with minimal cost, the model-based optimal controller is designed. The integrated prediction model is established to provide a more accurate on-line prediction of the process indices by integrating the mechanism prediction model and an error compensation model based on the least-square support vector machine. Based on the predicted process indices, the compensator is developed for the optimal controller. The adjustor provides a parameter adjustment mechanism. Four-week-long industrial experiments in the largest zinc hydrometallurgy plant in China show that the control strategy can not only improve the process-indexes control performance, but also save 6.55 oxygen and 4.61 zinc oxide consumptions, which translates to 222858m3 oxygen and 1236t zinc oxide per year (a saving of about $570000). The hybrid control strategy can be extended to cover other similar processes in the zinc hydrometallurgy and other industries.

Optimal control for zinc solution purification based on interacting CSTR models

A New Nonlinear Optimal Control Design Approach for a Chemical Reactor

Immersion and Invariance Adaptive Control of a Class of Continuous Stirred Tank Reactors

A Hybrid Control Strategy for Real-Time Control of the Iron Removal Process of the Zinc Hydrometallurgy Plants

Research on Tuning Parameters for a Model Predictive Controller Based on CSA in CSTR Process

Dynamics and Control Designs for Internal Thermally Coupled Distillation Columns with Different Purities, Part 2: Close Loop Analysis and Control Designs

Robust PID Control for CSTR System Based on GLBest-PSO Algorithm

Zinc-ion concentration control based on mechanical model of zinc electrowinning process

Parameter optimal identification and dynamic behavior analysis of nonlinear model for the solution purification process of zinc hydrometallurgy

Modeling and Control of Water Purification Systems

Robust LQ optimal controller designing for refining process

Dynamic optimization based on state transition algorithm for copper removal process

Study on a Discrete-Time Dynamic Control Model to Enhance Nitrogen Removal with Fluctuation of Influent in Oxidation Ditches.

Modeling and Control of a Continuous Stirred Tank Reactor Based on a Mixed Logical Dynamical Model

Optimal Control of Chromate Removal via Enhanced Modeling using the Method of Moments

Optimal Setting and Control for Iron Removal Process Based on Adaptive Neural Network Soft-Sensor

Plant-wide Modeling, Design Consideration, and Practical Hierarchical Control Strategy Considering Key Variable Integral Characteristics for an Industrial Alkaline Water Electrolyzer Plant

Orthogonal Test Design Based Analysis of Factors Controlling Simultaneous Anaerobic Sulfide and Nitrate Removal Process

Multiobjective-Based Optimization and Control for Iron Removal Process Under Dynamic Environment

Study on the Removal of Chloride Ions in an Acidic Solution of Zinc Smelting by Green Method

Multi-Objective Adaptive Optimization Model Predictive Control: Decreasing Carbon Emissions from a Zinc Oxide Rotary Kiln