Abstract:As part of the zinc hydrometallurgy plant, the iron removal process is a complex system with four cascaded reactors. Tighter process-index control is difficult to achieve due to the complicated, long, and time-varying removal process. The control performance is also affected by the quality of the ore source and external disturbances. Little research is documented in the literature to address these difficulties and manual control is widely used. An innovative hybrid control strategy is developed to control the iron removal process indices within narrow ranges with minimum cost of additive regents, including oxygen and zinc oxide. This strategy is composed of an optimal setting model, a model-based optimal controller, an integrated prediction model, a fuzzy-logic-based feedforward compensator, and a model feedback adjustor. The optimal setting model automatically optimizes the set-points of the process indices under different production conditions. To achieve the process requirements with minimal cost, the model-based optimal controller is designed. The integrated prediction model is established to provide a more accurate on-line prediction of the process indices by integrating the mechanism prediction model and an error compensation model based on the least-square support vector machine. Based on the predicted process indices, the compensator is developed for the optimal controller. The adjustor provides a parameter adjustment mechanism. Four-week-long industrial experiments in the largest zinc hydrometallurgy plant in China show that the control strategy can not only improve the process-indexes control performance, but also save 6.55 oxygen and 4.61 zinc oxide consumptions, which translates to 222858m3 oxygen and 1236t zinc oxide per year (a saving of about $570000). The hybrid control strategy can be extended to cover other similar processes in the zinc hydrometallurgy and other industries.

Dynamic optimization based on state transition algorithm for copper removal process

Dynamic Optimization for Copper Removal Process with Continuous Production Constraints

Dynamic Multi-Objective Optimization and Fuzzy AHP for Copper Removal Process of Zinc Hydrometallurgy

Dynamic Optimization of Multivariable Endothermic Reaction in Cascade CSTR

Dynamic Modeling and Optimal Control of Goethite Process Based on the Rate-Controlling Step

Dynamic Multi-Objective Optimization Arising in Iron Precipitation of Zinc Hydrometallurgy

Optimal control based on control period calculation for copper removal process of zinc solution purification

Multi-stage Dynamic Optimization Method for Long-Term Planning of the Concentrate Ingredient in Copper Industry

Intelligent Optimal Setting Control of A Cobalt Removal Process

Optimal Control Strategy of Working Condition Transition for Copper Flash Smelting Process

Fractional Order Fuzzy PID Optimal Control in Copper Removal Process of Zinc Hydrometallurgy

A Co-optimized Control Method of Key Parameters During Operating State Migration in Zinc Electrolysis Process

Multiobjective-Based Optimization and Control for Iron Removal Process Under Dynamic Environment

A Hybrid Control Strategy for Real-Time Control of the Iron Removal Process of the Zinc Hydrometallurgy Plants

Transient cost-based optimization scheme of transient procedure for copper flash smelting process

Multi-objective Optimization Based Optimal Setting Control for Industrial Double-Stream Alumina Digestion Process

Convergence Depth Control for Process System Optimization

Optimal Control of Oxidizing Rate for Iron Precipitation Process in Zinc Hydrometallurgy

A Comprehensive Setting Method for the Optimal Setpoint of Controlled Variables in the Zinc Smelting Solution Purification Process under Multi-Variation Inlet Status

Set-Point Tracking and Multi-Objective Optimization-Based PID Control for the Goethite Process.

A Hierarchical Scheduled Optimization and Control for Minimizing Production Cost and Energy Consumption of CSTR