Abstract:This paper reports an enhancement of the nonlinear conductivity, thermal and mechanical properties of micro-silicon carbide/silicone elastomer (m-SiC/SE) composites by adding nano-aluminum nitride (n-AlN) for power module encapsulation applications. The electrical properties (such as nonlinear conductivity characteristics and transient permittivity obtained from polarization current, and trap distributions obtained from thermally stimulated depolarization current) and material properties (including thermo-gravimetric analysis, coefficient of thermal expansion (CTE), and thermal conductivity, tensile strength, strain at break and Young's modulus) of the pure SE, m-SiC/SE microcomposites, m-SiC/n-AlN/SE hybrid composites are investigated. The effect of the m-SiC fillers and n-AlN fillers on physicochemical properties of the SE matrix is analyzed by FT-IR spectroscopy and crosslinking degree. The measured nonlinear conductivity and transient permittivity are used for electric field simulation under DC stationary and square voltages. It is found that the addition of n-AlN fillers in the SE hybrid composite improves the nonlinear conductivity characteristics and mitigates the electric field under DC stationary and square voltages, compared to the SE microcomposite. Furthermore, the m-SiC/n-AlN/SE hybrid composite has a higher thermal degradation temperature, thermal conductivity, tensile strength, Young's modulus, and crosslinking degree than the SE microcomposite, whereas their CTE and strain at break are lower. It is elucidated that the m-SiC/n-AlN/SE hybrid composite with enhanced nonlinear conductivity and material properties is a promising packaging material for high-voltage power modules.

Improvement and function characteristics of siccvd/al composite electric heating actuators

Development of Electric Heating Actuators of Fiber Reinforced Metal Composite

A Numerical Model of Heating and Cooling Cycles to Study the Driven Response for Twisted and Coiled Polymer Actuator

Enhanced Field-Dependent Conductivity and Material Properties of Nano-Aln/micro-sic/silicone Elastomer Hybrid Composites for Electric Stress Mitigation in High-Voltage Power Modules

Forming process of hot-extruded SiCw/6061AI composites(I)

Development of a New Active Material Based on SiC-Fiber/Aluminum Composite

Geometrical Variation Analysis of an Electrothermally Driven Polysilicon Microactuator

Influence of Temperature on the Electromechanical Properties of Ionic Liquid-Doped Ionic Polymer-Metal Composite Actuators

A bi-directional thermal-driven actuator with conduction‐to‐insulation transformation behavior and its applications in overheating protection and early warning of fire

Heat spreading performance of SiC-based power module with bonded vapour chamber for electric powertrain integration

Designs for improving the performance of an electro-thermal in-plane actuator

Numerical study on temperature and thermal stress behaviors in silicon carbide heating elements within high-temperature annealing furnaces

Experimental Study and Modeling of a Differential SMA Spring Actuator

Analysis of processing map and parameters optimization during hot extrusion of 17 vol.% SiCp/2009Al composite

Design and performance evaluation of thin-film actuators based on flexible Ni-Co substrates

Improved Designs for an Electrothermal In-Plane Microactuator

An Arm-Like Electrothermal Actuator Based on Superaligned Carbon Nanotube/polymer Composites

Development of All Metal Electrothermal Actuator and Its Applications

An Evaluation on Thermal Performance Improvements for SiC Power Module Integrated with Vapor Chamber in MMC

Development of IPMC actuators with high bending uniformity and orientation

Towards a consistent methodology for testing the electromechanical performance of strip polymer composite actuators