Abstract:Two control schemes are proposed to control dynamic plants with time delay and double integrators. One adopts the H-2 optimal controller, whereas the other utilises a conventional derivative controller for the setpoint tracking in an open-loop control manner. Both of the proposed control schemes are of the two-degree-of-freedom control structure and use an identical disturbance estimator to construct the closed-loop between the plant input and output for load disturbance rejection. In consequence, the setpoint response is decoupled from the load disturbance response. The disturbance estimator is obtained by proposing a desired closed-loop complementary sensitivity function according to the H-2 optimal performance objective. The closed-loop robust stability is analysed and corresponding sufficient and necessary conditions are also provided in the presence of the plant multiplicative uncertainty. Consequently a rule-of-thumb for tuning the single adjustable parameter of the disturbance estimator is presented. Finally, illustrative examples are included to show that a good performance can be obtained using the two proposed control schemes, especially the proposed closed-loop for the load disturbance rejection, which can also be successfully utilised to reject ramp-type load disturbances in industrial and chemical processes with one integrator.

Two-Degree-of-Freedom Controller Design for an Ill-Conditioned Process Using H2 Decoupling Control

H∞ Design of 2D Controller for Batch Processes with Uncertainties and Interval Time-Varying Delays

No-Weight Design of H-2 Controllers for Square Plants

Two-Degrees-of-Freedom Decoupling Control for Stable Multivariable Processes

Optimal Disturbance Rejection Controller Design for Integrating Processes with Dead Time Based on Algebraic Theory

Analytical Design Of New Two-Degree-Of-Freedom Controller For Integrating Processes

Design of H2 Control for Discrete-Time Descriptor Systems

H2 optimal controller possessing integrity with state feedback

Quantitative Performance Design for H2 Controllers of Unstable Processes with Time Delay

Design of Modified 2-Degree-of-freedom Proportional–integral–derivative Controller for Unstable Processes

Application of PID Controller to 2D Differential Geometric Guidance and Control Problem

TWO-DEGREE-OF-FREEDOM CONTROL SCHEME FOR PROCESSES WITH LARGE TIME DELAY

Analytical Decoupling Control Design for Dynamic Plants with Time Delay and Double Integrators

Analytical Design of PID Decoupling Control for TITO Processes with Time Delays

Centralized Pi/Pid Controller Design for Multivariable Processes

Decoupling two-degree-of-freedom control strategy for cascade control systems

Controller Design for High-Order Descriptor Linear Systems Based on Requirements on Tracking Performance and Disturbance Rejection

Robust Two-Degree-of-freedom Internal Model Control

Desired-dynamics-based Design of Control Strategy for Multivariable System with Time Delays

Two Degree-of-freedom Control Design with Improved H∞ LMI Representation

Application of Desired Dynamic Equation Method in Control of Four-tank Liquid-level System