Abstract:A marine drilling riser at normal operation condition is required to disconnect the lower marine riser package (LMRP) and blow-out preventer (BOP) in case of severe weather. When the weather gets fine, it must reconnect the LMRP and the BOP. This process is called riser reentry. Marine drilling operations have been driven into extreme deep-waters characterized by severe weather which inevitably leads to a much higher incidence of disconnection. In addition, it requires to accomplish the reentry in a fast way owing to the capricious ocean environment. This study tries to develop a novel reentry control system based on model predictive control (MPC). First, the transverse governing equation of the hanging-off riser system with an end-mass is established based on the modified Hamilton’s principle. The optimization function and constraints in MPC are designed by use of the riser prediction model and the target location. A nonlinear disturbance observer is established for compensation of the model uncertainties and ocean environment disturbances. Finally, simulations are conducted after introducing the dynamic position system (DPS). The riser dynamics employing MPC are compared with that when adopting proportional-integral-derivative (PID) controller. It has found that the drilling riser system based on MPC has a higher response speed, which can complete the reentry process in a faster and more stable manner. It can handle the hydrodynamic force model uncertainties well and has a good robustness for current velocity disturbances. As the flexibility of the riser system is notably enhanced with the significant increase of aspect ratio, the higher-order mode of the flexible hanging-off riser can be triggered in the fast reentry process subjected to the excitations of the mother vessel and ocean environment.

Modeling and Control of A Flexible Riser with Application to Marine Installation

Dynamic Response of DP Offshore Platform-Riser Multi-Body System Based on UKF-PID Control

Robust Dynamic Positioning of Autonomous Surface Vessels with Tube-Based Model Predictive Control

Adaptive Vibration Control of a Flexible Marine Riser Via the Backstepping Technique and Disturbance Adaptation

Vibration control of a flexible marine riser with joint angle constraint

Top Tension Control of a Flexible Marine Riser by Using Integral-Barrier Lyapunov Function

Stabilization control of a flexible marine riser with failed and bounded actuator and time‐varying boundary constraints

Vibration control of a flexible marine riser coupled with the internal fluid dynamics

Boundary barrier‐based control of a flexible riser system

Flexibility Investigation of a Marine Riser System Based on an Accurate and Efficient Modelling and Flexible Multibody Dynamics

Nonlinear dynamic optimization of marine riser system anti-recoil under a flexible multibody framework

PDE Based Adaptive Control of Flexible Riser System With Input Backlash and State Constraints

Boundary control of multiple-sectioned flexible marine riser with time-varying output constraint

Adaptive Stabilisation of a Flexible Riser by Using the Lyapunov-based Barrier Backstepping Technique

Observer-based Backstepping Boundary Control for a Flexible Riser System

Mathematical Modelling and Dynamic Analysis of an Offshore Drilling Riser

Simulation Study of Reentry Dynamics of a Deep-Water Drilling Riser System Based on Model Predictive Control

Dynamic Analysis of A Deepwater Drilling Riser with A New Hang-off System

Model and collision prevention control for 2-D vessel-riser array system based on improved wake interference model

Dynamic analysis of the subsea production system with lazy-wave risers attached to FPSO

Adaptive neural network control of multiple‐sectioned flexible riser with time‐varying output constraint and input nonlinearity