Abstract:In this paper, an original multi-phase Surface Mounted Permanent Magnet (SMPM) Machine designed for naval propulsion is proposed. The design objective of this high power low speed machine is twofold: to enhance the fault tolerance capability of the system and to optimize the quality of the torque by reducing the electromagnetic torque ripples which underlie the acoustic behaviour of the motor and of the global mechanical structure. A low level of ripple torques must also be ensured in faulty operations. To fullfill these constraints, the machine is equipped with a fractional-slot concentrated winding made up of four 3-phase windings each one being star-connected, each star being magnetically shifted by an angle of 15 degrees. This 4-star 3-phase configuration allows to reduce the cogging torque and to separate magnetically and physically the phase windings. The end-turns are also drastically reduced, which improves the compactness and the efficiency of the machine. This original multi-phase machine is supplied by four 3-phase PWM voltage source inverter with sinusoidal current law. The magnetic independences between the four star windings allow a very simple control of the four-star supply and a straightforward fault operating mode. Moreover, this 4-star winding configuration yields to very low torque ripples in nominal configuration (four stars connected) and in faulty operations if two magnetic non adjacent stars are disconnected. For all these reasons, this structure appears particularly suitable for naval propulsion application since it increases the machine performances in terms of compactness, reliability and quality of torque.

The Torque Ripple and Minimization in Multi-Unit Permanent Magnet Synchronous Motor for Electromagnetic Thruster

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Mathematical model and torque ripple reduction for multi-unit permanent magnet synchronous motor

Asymmetry of Inductance and Torque Ripple of Multi-Unit Permanent Magnet Synchronous Motor

Torque Ripple Reduction of a Salient-Pole Permanent Magnet Synchronous Machine with an Advanced Step-Skewed Rotor Design.

Multiphase PMSM with Asymmetric Windings for Electric Drive

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Design and Analysis of a 500W 120000rpm High-Speed Permanent Magnet Motor

Asymmetric Operation Of Fifteen Phase Permanent Magnet Synchronous Motor And Torque Ripple Suppression Of Stator Windings Switching

Torque Ripple Suppression Based on Optimal Harmonic Current Injection in Dual Three-Phase PMSMs under Magnetic Saturation.

Design and analysis of high power density permanent magnet-assisted synchronous reluctance motor

Torque Ripple Reduction in Sectored Multi Three-Phase Machines Based on PWM Carrier Phase Shift

An Indirect Testing Method for the Torque Ripple of Multiunit Permanent Magnet Synchronous Machines.

Torque Ripple Minimization of the Permanent Magnet Synchronous Machine by Modulation of the Phase Currents

A multi-phase surface mounted permanent magnet design to reduce torque ripples and joule losses

Electromagnetic Characteristics Analysis and Torque Ripple Reduction for Doubly Salient PM Machine

Torque Sideband Harmonics Suppressing in Uneven Power Distribution for -Module In-Wheel PMSM Drives

Modeling and Suppression of Torque Ripple in PMSM Based on the General Airgap Field Modulation Theory

Multi-star multi-phase winding for a high power naval propulsion machine with low ripple torques and high fault tolerant ability