Millimeter-wave Homogenous Cylindrical Lens Antenna for Multiple Fan-Beam Scanning

C. Z. Hua,X. D. Wu,N. Yang,W. Wu
DOI: https://doi.org/10.1080/09205071.2012.721181
2012-01-01
Journal of Electromagnetic Waves and Applications
Abstract:A multi-beam cylindrical lens antenna operating at mm-wave frequencies has been designed using dielectric-filled parallel plate techniques. The system is composed of a homogeneous cylindrical lens and an arc feed array of planar linearly tapered slot antenna (LTSA). The cylindrical lens is made out of Rexolite (epsilon(r) = 2.54) and sandwiched between two parallel plates. The LTSA feed array is placed between the parallel plates at the periphery of the cylindrical lens to launch multiple beams. A ray-tracing method and CST-MWS are used to analyze and design this cylindrical lens antenna at 30 GHz. Measured results of a fabricated cylindrical lens, with a diameter of 100 mm, show good agreement with simulations. The measured 3-dB E- and H-plane beamwidths are 6.0 degrees and 52 degrees, respectively, and the sidelobe level in the E-plane is -14.7 dB. An impedance bandwidth of 16.7% is achieved over which the measured aperture efficiencies are better than 61.5%. The measured E-plane patterns of a 25-beam array with a crossover of -3 dB and a scan angle of 150 are also demonstrated, which provide a wide scan angle at mm-wave band.
What problem does this paper attempt to address?