Single-Layer Wideband Tilted Beam Phased Array Antenna for Millimeter-Wave Vehicle Communications
Kai Chen,Jun Xu,Qingqing Lin,Yuanwei Zhu,Wei Hong
DOI: https://doi.org/10.1109/tvt.2023.3323965
IF: 6.8
2024-01-01
IEEE Transactions on Vehicular Technology
Abstract:In this article, a wideband tilted beam phased array antenna is proposed for millimeter-wave (mmWave) vehicle communications. The developed antenna element obtains a measured | S 11 |<-10 dB impedance bandwidth of 49.4% (23.3-38.6 GHz) by loading two monopoles ahead of the open-end aperture of a single-layer substrate integrated waveguide (SIW) with an etched transverse slot, thus, covering multiple allocated mmWave bands of the fifth-generation (5G). Meanwhile, the loaded two monopole structures also introduce a broadside radiation aperture, which combines with the original end-fire radiation aperture forming a stable 45° tilted beam pattern within the frequency band. Prototype of a 1 × 4 phased array is fabricated and measured, and the beam scanning performance of the array is verified using a multi-channel beamformer, with a 3 dB beam scanning range exceeds 86° at 27 GHz. The proposed antenna boasts the characteristics of wideband, a stable tilted beam, and good beam scanning performance, rendering it a promising candidate for mmWave vehicular communications. Additionally, a hybrid 2D beam scanning is realized by combining a cylindrical Luneburg lens antenna with the 1×4 phased array to fully exploit the advantages of both techniques. Experimental validation has also been carried out to confirm the feasibility of the proposed hybrid 2D beam scanning scheme.