Abstract:The compressive response of a NiTi shape-memory alloy is investigated at high strain rates, using UCSD’s modified split Hopkinson pressure bar and a mini-Hopkinson bar with specially designed striker bars. To obtain a constant strain rate during the formation of the stress-induced martensite phase in a Hopkinson test, a copper-tube pulse shaper of suitable dimensions or a stepped striker bar is employed, since without a pulse shaper or with a uniform striker bar, the strain rate of the sample will vary significantly as the material’s microstructure changes from austenite to martensite, whereas with proper pulse shaping techniques a nearly constant strain rate can be achieved over a certain deformation range. At a very high strain rate, the yield stress and the stress-induced martensite formation process are significantly different from those at moderately high strain rates, suggesting that, correspondingly, different microstructural changes may be involved in the phase transition regime. The material’s yield stress appears lower when measured in a mini-Hopkinson bar (with very small samples) as compared with that measured by a 1/2-in. Hopkinson bar (with relatively large samples), possibly due to the sample size that may produce different deformation mechanisms within the superelastic strain range. The transition stress from the austenite to the martensite phase shows strain-rate sensitivity. This may be explained by considering the interfacial motion of the formed martensite phase, based on the thermally activated and dislocation-drag models. There exists a certain critical strain-rate level, at which the transition stress for the stress-induced martensite formation equals the yield stress of the austenite phase. Therefore, the shape-memory alloy deforms by the formation of stress-induced martensites, accompanied by the yielding of the martensite phase at this critical strain rate, while the material deforms plastically by the dislocation-induced plastic slip at strain rates above this critical level.

Rate Dependence of Temperature Fields and Energy Dissipations in Non-Static Pseudoelasticity

Computational Martensite Re-Orientation in Shape Memory Alloys and the Related Hysteretic Dynamics

A Phenomenological Model for Thermally-Induced Hysteresis in Polycrystalline Shape Memory Alloys with Internal Loops

Rate dependent damping of single crystal CuAlNi shape memory alloy

Three-dimensional Thermomechanical Modeling of Pseudoelasticity in Shape Memory Alloys with Different Elastic Properties Between Austenite and Martensite

Micromechanical modelling of the effect of plastic deformation on the mechanical behaviour in pseudoelastic shape memory alloys

Macroscopic modeling of strain-rate dependent energy dissipation of superelastic SMAs considering destabilization of martensitic lattice

Effect of Thermomechanical Coupling on Stress-Induced Martensitic Transformation Around the Crack Tip of Edge Cracked Shape Memory Alloy

Very High Strain-Rate Response of a NiTi Shape-Memory Alloy

Experimental Study of One‐dimensional Superelastic Capability of a Nearly Equi‐atomic NiTi Shape Memory Alloy

Experimental Investigation on Rate Dependence of Thermomechanical Response in Superelastic NiTi Shape Memory Alloy

A mathematical model for the hysteresis in shape memory alloys

A micromechanical constitutive model of high-temperature shape memory alloys

High Strain Rate Deformation of Martensitic Niti Shape Memory Alloy

Influence of Strain Rate on Deformation Properties of TiNi Shape Memory Alloy

Martensitic transformation and stress-strain relations of shape-memory alloys

Three-dimensional, Non-Isothermal Phase-Field Modeling of Thermally and Stress-Induced Martensitic Transformations in Shape Memory Alloys

Thermomechanical coupling in cyclic phase transition of shape memory material under periodic stressing—experiment and modeling

Energy-based Analysis of Temperature Oscillation at the Shakedown State in Shape Memory Alloys

On The Characteristic Temperatures Of The Martensitic Transformation In Shape Memory Alloys

Strain Rate Dependent Formulation of the Latent Heat Evolution of Superelastic Shape Memory Alloy Wires Incorporated in Multistory Frame Structures