Abstract:This study presents a novel nanocomposite of LLDPE/15 wt.% PTFE/1 wt.% GNPs by using a hot compression molding technique to increase its compatibility with harsh operations in bearing surface applications. From an industrial perspective, various problems occur in bearing surface applications during running, particularly an overheating problem. Therefore, the major objective of this study is to synthesize LLDPE by mixing a dual matrix of LLDPE/x wt.% PTFE with different weight fractions of PTFE (from 0 wt.% up to 20 wt.%) and then incorporating the optimum case of a dual matrix with different weight fractions of GNPs (from 0 wt.% up to 1.5 wt.%) to improve mechanical and tribological properties. SEM was used to describe microstructural observations of the prepared nanocomposites. Compression and microhardness tests were performed to investigate the mechanical properties. Dry sliding wear and COF tests were implemented by pin-on-disc with a load cell to examine the tribological characteristics. Microstructural observations of LLDPE/15 wt.% PTFE elucidate good mixing compared to pure LLDPE samples. In addition, observations of morphological properties show ideal mixing and adhesion between LLDPE/15 wt.% PTFE and 1 wt.% GNPs, which eliminate defects and cause a strengthening mechanism between matrix and reinforcement. Elastic modulus and microhardness of LLDPE/15 wt.% PTFE were improved by 73.77 % and 41.39 %, respectively, compared to pure LLDPE samples. Moreover, the wear rate and COF of LLDPE/15 wt.% PTFE composites were enhanced by 72.41 and 7.04 %, respectively, compared to pure LLDPE. Moreover, after adding 1 wt.% of GNPs to LLDPE/15 wt.% PTFE, elastic modulus, microhardness, wear rate, and COF were improved by 16.15 %, 27.47 %, 29.73 %, and 45.24 %, respectively, compared to the unfilled dual matrix of LLDPE/15 wt.% PTFE.

Tribological Behavior of PTFE Nanocomposites Reinforced with PBA Grafted Alumina Nanoparticles

Tribological Properties of Ptfe Nanocomposites Filled with Alumina Nanoparticles

Tribological and Mechanochemical Properties of Nanoparticle-Filled Polytetrafluoroethylene Composites under Different Loads

Advance in Research on Tribological Properties of PTFE Nanocomposites

The Preparation of PTFE Nanocomposites and Their Mechanical and Tribological Properties

Tribological Behavior of Carbon-Nanotube-Filled PTFE Composites

Enhanced thermal conductivity and wear resistance of polytetrafluoroethylene via incorporating hexagonal boron nitride and alumina particles

Tribological Behavior of Polytetrafluoroethylene Coating Reinforced with Black Phosphorus Nanoparticles

Mechanical and tribological properties of polyoxymethylene modified with nanoparticles and solid lubricants

Effect of Grafted Polytetrafluoroethylene Nanoparticles on the Mechanical and Tribological Performances of Phenol Resin

The tribological properties of PTFE filled with thermally treated nano-attapulgite

Ag nanoparticles homogeneously anchored on kaolin synergistically improve the tribological performance of PBO/phenolic resin liner composites

Study on the friction and wear behavior of POM/Al2O3 nanocomposites

Effect of Various Type of Nanoparticles on Mechanical and Tribological Properties of Wear-Resistant PEEK + PTFE-Based Composites

Microstructural, mechanical, and tribological properties of a novel hybrid LLDPE/PTFE/x wt.% GNPs for bearing surface applications

Tribological Behavior of Poly(tetrafluoroethylene) and Its Composites Reinforced by Carbon Nanotubes and Graphene Sheets: Molecular Dynamics Simulation

Perfluoroalkoxy (PFA)-α-Alumina Composites: Effect of Environment on Tribological Performance

The effects of filler type on the friction and wear performance of PEEK and PTFE composites under hybrid wear conditions

Enhancement mechanism exploration of hexagonal boron nitride on the mechanical and tribological properties of polytetrafluoroethylene composites by experiments and molecular dynamics simulation

Effect of homologous molecular crosslinking on the tribological properties of PTFE composites

Tribological performance of Graphene/Carbon nanotube hybrid reinforced Al2O3 composites