Abstract:As a result of local factors, limited amounts of land and construction demands, subway lines are sometimes designed to run in close proximity to buildings. Hence, using a real Beijing subway engineering project, we have studied the vibration induced in a building by a moving rail vehicle. A numerical model of the spatially coupled vehicle–track–building system was developed to predict the vibration levels in the structure. The modeling theory was verified by comparison with multi-body system simulations and field test results. Two common types of track, namely, ballasted track and floating slab track were studied and their vibration-mitigation effects were compared in the time and frequency domains. A comparison of the particle peak velocities with the structural vibration limits of the floating floor slab and the first floor of a building revealed a very low possibility of severe damage resulting from vehicle-induced vibration for both types of tracks. We also conducted a one-third octave analysis of the vibration of each building floor and obtained the weighted root-mean-squared acceleration and vibration levels. A comparison of the weighted accelerations with the vibration limits for vibration perception by a human for both types of tracks also revealed that train-induced vibration had no obvious effect on daily human activities on most of the floors. The main exception to this observation was the first floor, which is located close to the vibration source. It is recommended that the first floor should be used for purposes other than residential. Furthermore, a comparison of the vibration levels of each floor for both types of tracks showed that the ballasted track had a better vibration-mitigation effect than the floating slab track for this special engineering case.

Study on Isolation Efficiency of Floating Slab Track Using a Numerical Prediction Model of Metro Traffic Induced Vibrations

STUDY ON ISOLATION EFFICIENCY OF A FLOATING SLAB TRACK USING A NUMERICAL PREDICTION MODEL OF METRO TRAFFIC INDUCED VIBRATIONS

Study of effect on sensitive equipment due to vibrations induced by metro traffic

Prediction of effects of vibration induced by running metro trains on sensitive instruments

Analytical prediction model of ground vibration response induced by metro floating-type track

Prediction of Vibrations from Underground Trains on Beijing Metro Line 15

Prediction of Vibrations Induced by Trains on Line 8 of Beijing Metro

A Novel Method to Solve the Existed Paradox of Low-Frequency Vibration Isolation and Displacement Attenuation in a Nonlinear Floating-Slab on the Wheel-Rail Loads

Predicting the Influence of Vibration from Trains in the Throat Area of a Metro Depot on Over-Track Buildings

Dynamic Analysis of Metro Train-Monolithic Bed Track System under Tunnel Differential Settlement

Numerical simulation and model prediction for environmental vibrations induced by metro operation

Numerical analysis of influence of different track structures on vibration response of subway

A Semi-Analytical Model of the Train-Floating Slab Track–tunnel–soil System Considering the Non-Linear Wheel/rail Contact

Vibration Prediction And Evaluation For Existing Metro Structures Induced By Underground Railway Traffic In Beijing

The Influence of the Track Parameters on Vibration Characteristics of Subway Tunnel

Prediction of Structural Vibrations Using a Coupled Vehicle-Track–building Model

Environmental Vibration Isolation Tests and Analysis on Steel Spring Floating Slab Track Used in Subway

Numerical Study on Acoustic Characteristics of Embedded Track Used in a Metro

In-situ Measurements of and Analysis on Environmental Effects of Vibrations Induced by Passage of Metro Trains and Vehicles on the Road

Metro Train-Induced Vibrations Of Surrounding Ground And Building

An Efficient Prediction Model for Vibrations Induced by Underground Railway Traffic and Experimental Validation