Study of effect on sensitive equipment due to vibrations induced by metro traffic

Wei-feng LIU,Wei-ning LIU,Meng MA,Ke-fei LI,Wen-bin WANG

DOI: https://doi.org/10.3969/j.issn.1004-4523.2012.02.005

2012-01-01

Abstract:The effect on the sensitive equipment in the physics laboratory of Peking University due to vibrations induced by metro traffic and the isolation efficiency of floating slab track in tunnels on line 4 were studied by means of a numerical model and in-situ vibration measurement. In this model, based on the analytical solution of dynamic response excited by the moving loads, the vibrations induced by passage of metro trains can be calculated if the transfer function in the frequency-wavenumber domain and the moving axle loads in the frequency domain can be obtained. The transfer function is calculated using the three-dimensional coupled periodic finite element-boundary element model in the frequency-wavenumber domain, and the moving axle loads are considered as the contact force between wheel and rail due to the rail unevenness. The in-situ vibration measurement was performed outside and inside the laboratory, and the background vibration, the vibrations induced only by buses and metro trains, and the combined vibrations due to road traffic and metro traffic were measured. The results show that the floating slab track is an effective vibration isolation measure, which can efficiently reduce the vibrations in its work frequency range. At low frequencies the metro train induced vibrations may have effect on the sensitive equipment, and the buses induced vibrations and the combined vibrations due to road traffic and metro traffic affect the sensitive equipment, which can be reduced by the passive isolation measure under the base of equipment.