Abstract:This paper presents an experimental and theoretical study of surface generation in the ultra-precision grinding of hard and brittle materials. The study takes into account the material properties, the relative vibration between the grinding wheel and the workpiece, the machining parameters and the phase shift of the grinding process. The Taguchi approach is employed to study the influence of machining parameters on the surface quality and shows that the feed speed and rotational speed of the workpiece are key factors. Experiments have been conducted to study individual variables, and the results further show that the feed rate and the cross-feed distance have a significant effect on surface generation. It is found that the spirals around the central area of the workpiece are the primary mechanism for surface generation, which originates from the synchronous relative tool-work vibration. The integral part of the ratio of the rotational speed of the grinding wheel to rotational speed of the workpiece determines the number of spirals and its fractional part controls the spiral geometry. A theoretical model for predicting the single spiral generation has been developed to explain the accumulation of the phase shift and the geometry. The changeable feed speed near the end of grinding is also modelled, revealing the approximate straight lines around one circle in the central region. The simulated results indicate that the theoretical models and the ground surfaces are in close agreement. The scallop-height model is developed to calculate the influence of phase shift on surface quality, and it is found that the phase shift near the medium value can effectively improve surface quality. Finally, a comparison of different surface generation mechanisms in grinding mould steel, tungsten carbide (WC) and reaction bonded silicon carbide (RB-SiC) is made. It is interesting to note that the Spanzipfel effect contributes to the surface generation not only on ductile materials such as mould steel but also on brittle materials such as WC and RB-SiC. The Spanzipfel effect is the most significant in grinding mould steel. For WC and RB-SiC, the ground surface contains both a ductile region and a brittle region in the form of micro-fractures.

Research on Simulation and Experiment for Workpiece Micro-surface in Point Grinding

Experimental Research on the Effect of Grinding Parameters on Ceramic Machined Surface Roughness

Numerical Simulation and Experimental Validation of Fixed Abrasive Grinding Pad Topography

Modeling and Simulation of Grinding Surface Topography Considering Wheel Vibration

Research on the Analytical Thermal Model in Surface Grinding by Cup Wheel

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Validation of an analytical model for grinding temperatures in surface grinding by cup wheel with numerical and experimental results

Influence of diamond wheel grinding process on surface micro-topography and properties of SiO2/SiO2 composite

Theoretical Generalization and Research on the Mechanism of the Unsteady-State Grinding Technique

Studies on the Surface Quality of the Unsteady-State Grinding Technique

A simulation method for surface height distribution of end-face grinding workpieces

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Investigation of the grinding temperature and subsurface quality of a novel point grinding wheel

A parametric evaluation model of abrasive interaction for predicting tooth rough surface in spiral bevel gear grinding

A Novel Simulation Method of Micro-Topography for Grinding Surface.

An experimental and theoretical analysis of surface generation in the ultra-precision grinding of hard and brittle materials

The study on the influences of superabrasive grain spatial orientation for microcutting processes based on response surface methodology

Modeling and experimental study on the grinding performance of precision diamond grinding tool with defined texture

Generation Mechanism Modeling of Surface Topography in Tangential Ultrasonic Vibration-Assisted Grinding with Green Silicon Carbide Abrasive Wheel

Surface roughness model of ultrasonic vibration-assisted grinding GCr15SiMn bearing steel and surface topography evaluation

Modeling and validation of the grinding morphology of ordered diamond grinding wheel