Abstract:HZSM-5 is a widely used catalyst for the conversion of methanol to aromatics (MTA), but its single micropore system often results in severe diffusion limitations, leading to the decrease of reaction rate and the change of selectivity to aromatics, as well as affecting the carbon deposition and catalyst deactivation. Thus, an ingenious protective desiliconization method with a mixed solution of sodium hydroxide and tetrapropylammonium hydroxide as a desiliconization agent was developed to create hierarchical porous systems without destruction of the main structure of the molecular sieve. Such modification leads to the greatly increased mesoporous volume from 0.12 to 0.38 cm(3) g(-1), and only slightly decreased microporous volume from 0.12 to 0.09 cm(3) g(-1). However, the desiliconization sharply increases the acidity of the catalyst (from 0.248 to 0.341 mmol g(-1) for the strong acid sites), which may significantly affect the distribution of aromatics and accelerate the carbon deposition rate. Thus, the deposition of inert SiO2 on the catalyst surface is subsequently carried out to passivate the surface acidity and adjust the orifice of the catalyst. Accordingly, a hierarchical porous HZSM-5 molecular sieve catalyst (Si@Z5-Na + TP) with suitable acidity is precisely prepared, which exhibits the high selectivity to benzene, toluene and xylenes (BTX) with the excellent anticoking ability in the MTA reaction. The selectivity to BTX in aromatics (63.32%) and the carbon deposition rate (0.91 mg g(cat)(-1) h(-1)) over the Si@Z5-Na + TP catalyst are both much more superior than those over the parent HZSM-5 catalyst (47.5% and 2.23 mg g(cat)(-1) h(-1), respectively).

The research of diluents added to HZSM-5 on the methanol to gasoline reaction

The catalytic properties evolution of HZSM-5 in the conversion of methanol to gasoline

Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Effect of Methanol on Catalytic Performance of Hy Zeolite for Desulfurization of Fcc Gasoline by Alkylation

The Influence of Copper Dilution on HZSM-5 Catalytic Performance in the Conversion of Methanol to Gasoline

Effect of Metal on the Methanol to Aromatics Conversion over Modified ZSM-5 in the Presence of Carbon Dioxide

Strong Cu/ZnO Interfacial Interaction Induced by ZrO2 Promoter Suppressing the Ethanol Formation in Industrial Methanol Synthesis

Methanol to Gasoline Conversion over CuO / ZSM-5 Catalyst Synthesized and Influence of Water on Conversion

Products distribution in methanol to gasoline over HZSM-5 Catalysts with different Si/Al ratio

Methylation of Toluene with Methanol over Metal Oxide-Modified Hzsm-5 Catalysts

Regulating Surface Acid-Base Balance on NaZSM-5 by Fe Modification Towards Enhanced Methanol Dehydration to Dimethyl Ether

Regulating Hierarchical Structure and Acidity of HZSM-5 for Methanol to Aromatics Via Protective Desiliconization and External Surface Modification

Aromatization of Methanol over La/Zn/HZSM-5 Catalysts

Effect of Preparation Method on the Catalytic Performance of HZSM-5 Zeolite Catalysts in the MTH Reaction

Methanol to Gasoline Conversion over CuO/ZSM-5 Catalyst Synthesized Using Sonochemistry Method

Enhancement of the Utilization of Methanol in the Alkylation of Benzene with Methanol over 3-Aminopropyltriethoxysilane Modified HZSM-5

Aromatization of Methanol on Ag/ZSM-5 Catalyst

Influence of methanol gasoline blend fuel on engine and catalyst performance

Effects of Methanol Application on Carbon Emissions and Pollutant Emissions Using a Passenger Vehicle

99/00320 Effect of oxide dispersion in a bifunctional catalyst on the formation of dimethyl ether