Abstract:SummaryThis paper presents redundancy‐bandwidth scalable techniques to deal with the intersymbol interference distortions for current‐steering digital‐to‐analog converters in high‐speed applications. A switching strategy that explores the use of redundant current sources is proposed to realize a signal‐independent element transition rate, ie, the number of switching activities during the transition of successive sampling clock cycles. With a certain number of redundant current sources, this strategy significantly reduces the intersymbol interference distortions without oversampling operation or causing signal attenuation, which makes it appealing for high‐speed applications. As analyzed in this paper, the number of required redundant current sources is scalable for different bandwidth requirement in specific applications, leading to 3 redundancy‐bandwidth scalable trade‐offs between the cost from redundant current sources and the high‐dynamic‐range bandwidth. In implementation, we propose a custom‐designed decoder, named as the overlap‐controlled data‐weighted averaging (OC‐DWA). Compared with the existing similar‐purpose designs, the proposed OC‐DWA decoder realizes the current sources selection with a simple barrel rotator, which is of much lower hardware complexity and energy consumption. Simulations of a digital‐to‐analog converter with this decoder exhibit an enhanced dynamic range over the entire Nyquist band, which verifies the redundancy‐bandwidth scalability of the proposed techniques.

A Cancellation Technique for Output-Dependent Delay Differences in High-Accuracy DACs.

Output-Dependent Delay Cancellation Technique for High-Accuracy Current-Steering Dacs

A 12-BIT 400-Ms/s CURRENT-STEERING DAC WITH DEGLITCHING TECHNIQUE

Analysis and Modeling of the Glitch Error in Current-Steering D/A Converter

A 12-Bit 1gs/s Current-Steering DAC with Matching Capacitor in Switched Current Cell

A 14-Bit 3-Gs/s DAC Achieving SFDR >63db Up to 1.4ghz with Random Differential-Quad Switching Technique

A 200 KHz Bandwidth ΣΔ DAC with a Spur Free Modulator

A 200 Khz Bandwidth Ea Dac With A Spur Free Modulator

An 18-Bit High Performance Audio Sigma-Delta D/A Converter

Design of a 12 bit High-Stability Digital-to-Analog Converter

A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.

Design of Analog Circuits in Multi-Bit Quantized Audio DAC

A 14-Bit 1.0-Gs/S Dynamic Element Matching Dac With > 80 Db Sfdr Up To The Nyquist

Redundancy‐bandwidth Scalable Techniques for Signal‐independent Element Transition Rates in High‐speed Current‐steering DACs

A Digital Calibration Technique for a 14 bit 200MS/s Current-steering DAC

Modeling and Mitigating Output-Dependent Modulation in Current-Steering DAC Based on Differential-Quad Switching Scheme

A 14-Bit 6gs/s DAC Achieving >65dbc SFDR with Bilateral Output Impedance Compensation in 22nm CMOS

Dynamic Mismatch Compensation (Dmc) Algorithm For Amplitude And Timing Errors In Current-Steering Dacs

Demystifying and Mitigating Code-Dependent Switching Distortions in Current-Steering DACs

A 14-Bit 2.5-Gs/s DAC Using CAL-TRZ

Code-independent Output Impedance: A New Approach to Increasing the Linearity of Current-Steering DACs