Abstract:Current-steering DACs are known to be suitable for wideband applications owing to the fast current switching with differential switches and the low output load resistance [1] –[6]. In current-steering DACs, mismatches between the current sources(CS) are the major source of nonlinearity. To reduce the CS mismatch effect, previous works often utilized the Dynamic Element Matching (DEM) [1], [4] or current-source calibration techniques [2], [3], [5], [6]. The DEM randomizes the DAC switching to spread the mismatch tones as noise to improve the SFDR at the expense of increased noise floor, deteriorating the SNR. Background calibration techniques do not have the noise floor issue as they reduce the CS mismatch directly with PVT insensitivity. However, the periodic CS switching operations, disengaging for calibration and reengaging for normal operation, generate unwanted calibration spurs. These spurs can be also randomized as in [6], but the technique still has a disadvantage of increased noise floor near the calibration frequency.

A Digital Calibration Technique for a 14 bit 200MS/s Current-steering DAC

A 12-BIT 400-Ms/s CURRENT-STEERING DAC WITH DEGLITCHING TECHNIQUE

A Digital Calibration for High-Resolution Current Steering DAC

A 12-Bit 1gs/s Current-Steering DAC with Matching Capacitor in Switched Current Cell

A Digitally Calibrated Current-Steering DAC with Current-Splitting Array

Analysis and Modeling of Dynamic Error in Current-Steering DAC

A 14-Bit 500-Ms/s DAC with Digital Background Calibration

A 2 GS/s 14-Bit Current-Steering DAC in 65 Nm CMOS Technology for Wireless Transmitter

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Current-Steering Self-Calibration 14-Bit 100-Msps DAC

Calibration technique tracking temperature for current-steering digital-to-analog converters

A 14-Bit 3-Gs/s DAC Achieving SFDR >63db Up to 1.4ghz with Random Differential-Quad Switching Technique

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A 14-Bit 250-Ms/s Current-Steering CMOS Digital-to-analog Converter

Digital Static Calibration Technology Used for 400MSPS, 16-Bit DAC

A 12-bit 1GS/s Current-Steering DAC with Paired Current Source Switching Background Mismatch Calibration

A 200ms/s 10-Bit Current-Steering D/A Converter with On-Chip Testbench

A 14-Bit 2.5-Gs/s DAC Using CAL-TRZ

Current-Steering DAC Calibration Using Q-Learning

A 14-Bit 6gs/s DAC Achieving >65dbc SFDR with Bilateral Output Impedance Compensation in 22nm CMOS

A 1.3V 12-bit 100-MHz Current-Steering DAC in 55nm Technology