Processing map of titanium alloy TC4 and its application for plate rolling analyses

Gang Fang,Jianrong Zou,Yafeng Lü,Yunlian Qi

2012-01-01

Abstract:The titanium alloy TC4 is widely used in the aerospace industry and the microstructure evolution during hot plastic deformation strongly influences its performance. This study developed a processing map of TC4 using thermal-mechanical tests which was integrated into a finite element program to investigate plate rolling. Flow stress data was obtained by isothermal uniaxial compression of the TC4 titanium alloy for test temperatures of 800~1050°C at strain rates from 0.01 to 20 s -1. The TC4 processing map is based on experiment data described by the dynamic material model (DMM) and validated by observations of the deformed microstructures. The processing map shows that the deformation temperature and speed dramatically influence the workability of TC4 titanium alloy. The TC4 is very stable at 1000~1050°C with a strain rate of 0.01 s -1, but has poor workability at 800~900°C with strain rates of 0.1~20 s -1. The processing map is integrated into the post-processing module of the finite element method (FEM) program DEFORM-2D as a user subroutine. The material formability in various positions of the deformated part can then be checked by the FEM calculations. The plate rolling of TC4 titanium alloy is simulated and the formability is then analyzed using the processing map.