Abstract:The chemoselective synthesis of ethylene glycol (EG) from the hydrogenation of dimethyl oxalate (DMO) derived from syngas is an attractive technology in the modern chemical industry. This work reported a novel hydrolysis precipitation (HP) method to efficiently tune the active copper species of Cu/SiO2 catalysts for DMO hydrogenation. Characterization techniques such as N-2 physical adsorption, X-ray diffraction, H-2 temperature programmed reduction, N2O titration, Fourier-transform infrared spectra, transmission electron microscopy, and X-ray photoelectron spectroscopy were employed to reveal the origin of the catalytic performances. Compared to the ammonia evaporation (AE) method, the HP method presented remarkable higher dispersion of copper species and large ratio of Cu+/(Cu+ + Cu-0) on the catalyst surface, resulting in a superior catalytic performance in the hydrogenation of DMO to EG. Moreover, the amount of Cu-0 and Cu+ sites on catalyst surface is dramatically affected by copper loading, and the catalyst with 30% copper showed the highest catalytic activity with a space time yield of 1.74 gEG/ (gcat.h) at 463 K. Meanwhile, the positive correlation between Cu+ surface area and space time yield of EG suggests that the amount Cu+ is the key factor for hydrogenation of DMO to EG on the as-prepared Cu/SiO2 catalyst. The formation of more Cu+ species in the catalyst would enhance the activation of C=0 group in DMO and significantly improve the catalytic performances in DMO hydrogenation. (C) 2016 Elsevier B.V. All rights reserved.

Ethanol synthesis from dimethyl oxalate hydrogenation on Cu/SiO 2 Catalyst

Ethanol Synthesis from Dimethyl Oxalate Hydrogenation on Cu/SiO<sub>2</sub> Catalyst

Ethylene glycol and ethanol synthesis from dimethyl oxalate hydrogenation on the Cu/ZnO/SiO2 catalysts

CuZnCoOx Multifunctional Catalyst for in Situ Hydrogenation of 5-Hydroxymethylfurfural with Ethanol As Hydrogen Carrier

Cu/SiO2 catalysts prepared by different methods for hydrogenolysis of dimethyl oxalate to ethylene glycol

Hydrogenation Of Dimethyl Oxalate To Ethylene Glycol Over Cu/Sio2 Catalysts

Superior silicon-free Cu catalyst for dimethyl oxalate hydrogenation: Exploring interaction between Cu and pyridinic-N-rich ultrathin carbon

Cu/Sio2 Catalysts Prepared by the Sol-Gel Method for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Ultra-stable Cu-based catalyst for dimethyl oxalate hydrogenation to ethylene glycol

Preparation and modification of Cu/SiO2 catalyst for hydrogenation of dimethyl oxalate to ethyl glycol

Synthesis of methyl glycolate by hydrogenation of dimethyl oxalate with a P modified Co/SiO 2 catalyst

Heterogeneous Cu2O-mediated Ethylene Glycol Production from Dimethyl Oxalate

Synthesis of a high surface area and highly dispersed Cu-O-Si complex oxide used for the low-temperature hydrogenation of dimethyl oxalate to ethylene glycol

Enhanced Catalytic Performance for SiO2–TiO2 Binary Oxide Supported Cu-based Catalyst in the Hydrogenation of Dimethyloxalate

Efficient Tuning of Surface Copper Species of Cu/SiO2 Catalyst for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Continuous Heterogeneous Hydrogenation of Co2-Derived Dimethyl Carbonate to Methanol over A Cu-Based Catalyst

Highly Active and Selective Cu/Sio2 Catalysts Prepared by the Urea Hydrolysis Method in Dimethyl Oxalate Hydrogenation

Catalytic Performance and Texture of Teos Based Cu/Sio2 Catalysts for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Direct synthesis of ethanol from dimethyl ether and syngas over combined H-Mordenite and Cu/ZnO catalysts.

Highly selective one-pot continuous synthesis of 2-methoxyethanol via hydrogenation of dimethyl oxalate on Cu/ZrO2 catalysts with balanced acid sites

A New Low-Cost and Effective Method for Enhancing the Catalytic Performance of Cu–SiO2 Catalysts for the Synthesis of Ethylene Glycol Via the Vapor-Phase Hydrogenation of Dimethyl Oxalate by Coating the Catalysts with Dextrin