Abstract:Earthquake-induced building collapse and progressive collapse due to accidental local failure of vertical components are the two most common failure modes of reinforced concrete (RC) frame structures. Conventional design methods usually focus on the design requirements of a specific hazard but neglect the interactions between different designs. For example, the progressive collapse design of an RC frame often yields increased reinforcement and flexural strength of the beams. As a result, the seismic design principle of "strong-column-weak-beam" may be violated, which may lead to unfavorable failure modes and weaken the seismic performance. To avoid these adverse effects of the progressive collapse design on the seismic resistance of RC frames, a novel structural detailing is proposed in this study. The proposed detailing technique intends to concurrently improve the seismic and progressive collapse performances of an RC frame by changing the layout of the newly added longitudinal reinforcement against progressive collapse without introducing any additional reinforcement. A six-story RC frame is used as the prototype building for this investigation. Both cyclic and progressive collapse tests are conducted to validate the performance of the proposed structural detailing. Based on the experimental results, detailed finite element (FE) models of the RC frame with different reinforcement layouts are established. The seismic and progressive collapse resistances of different models are compared based on the incremental dynamic analysis (IDA) and nonlinear dynamic alternate path (AP) methods, respectively. The results indicate that the proposed structural detailing can effectively resolve the conflict between the seismic and progressive collapse designs.

Study on optimization of seismic design for RC frames based on member importance index

Evaluating Method of Element Importance of Structural System Based on Generalized Structural Stiffness

An efficient method for optimizing the seismic resistance of reinforced concrete frame structures

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

Seismic Optimization Design for Uniform Damage of Reinforced Concrete Moment-Resisting Frames Using Consecutive Modal Pushover Analysis

INFLUENCE OF SEISMIC ACTION ADJUSTMENTS ON SEISMIC DESIGN AND SAFETY OF RC FRAMES

Sensitivity analysis on random variables of strong shear weak bending design reliability of RC column

Design of foundation structures of sea-crossing bridges on serviceability limit state

Influence of Structural Parameters to the Seismic Collapse Resistance of RC Frames in 7-degree Seismic Fortification Zone

Seismic Performance Factors of RC Frames with Infilled Walls Based on APOA and IDA

Preliminary study on seismic design method of RC frame structure under the excitations of two earthquakes

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

Study on energy-based seismic design method of reinforced concrete frame structures

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames

STUDY ON WEAK BEAM-STRONG COLUMN DESIGN METHOD OF RC FRAME STRUCTURES

Experimental study on seismic performance of RC frames reinforced with high-strength steel

Seismic Performance Evaluation of RC Frames with Uniform Infilled Walls Based on Adaptive CMS

Structural Seismic Capacity Optimization by Considering the Allowed Failure of Infills

A Comparative Test Study on the Seismic Damage Sustained by Frame-Core Tube Structures

Study on energy demand determination and design procedure in energy-based seismic design method of reinforced concrete frame-shear-wall structure

Seismic design and analysis of reinforced concrete buckling-restrained braced frame buildings with multi-performance criteria