Abstract:Rotating cavities with axial throughflow are found inside the compressor rotors of turbo-machines. The flow pattern and heat transfer in the cavities are known as sophisticated problems. Because of the numerical errors and model errors, as well as the stiffness introduced by low-Ma number, prediction of 3D unsteady flow and heat transfer in rotating cavity is still a challenge for modern CFD technology. An in-house 3D unsteady CFD code was developed in this study. The discontinuous galerkin method, which can fulfill any high-order accuracy on the unstructured grid, was applied to reduce the discretization errors. The SST-γ-Reθ transition model proposed by Menter was applied to reduce the model errors. To overcome the stiffness and achieve good convergence characteristics and solution quality, the preconditioning matrix technique combined with DG method was introduced for low-Ma number viscous flow. First, natural convection of air in a square cavity was studied to test the code. The feasibility and credibility, of applying the DG method and the preconditioned matrix technique for buoyancy–induced Rayleigh-Bénard like flow, were further verified. Second, the 3D compressible flow field in a rotating cavity was investigated numerically using the FV method, DG method and laminar/SA/SST-transition turbulence model. It is demonstrated that the whole flow structure of all calculated cases was similar after comparing the calculated results with the available experimental data. But, the transition turbulence model fitted the experimental data better. On the other hand, the performance of high-order method was much better for both the rotating cavity flow and natural convection, in terms of heat transfer. To better understand this phenomenon, an accuracy analysis of heat flux using DG method and FV method was performed. It showed the DG method could realize arbitrary precision of viscous stress and heat fluxes on irregular unstructured grids, while the FV method could only realize the first-order accuracy of the heat fluxes at the boundary faces and may exhibit erroneous behaviors. It also demonstrated that the high-order accuracy of gradients was needed to decrease errors of heat fluxes and viscous stresses, and that DG method was a promising method.

Rotational deformability of Temperature Analogy Method

Modeling Microstructure Evolution in Shape Memory Alloy Rods Via Legendre Wavelets Collocation Method

Fast Corotational Simulation for Example-Driven Deformation.

Periodic Fluid Flow And Heat Transfer In A Square Cavity Due To An Insulated Or Isothermal Rotating Rectangular Object

A new dynamic grids based on temperature analogy and its application in vibration engineering with fluid-solid interaction

A New Dynamic Mesh Algorithm for Studying the 3D Transient Flow Field of Tilting Pad Journal Bearings

2D shape manipulation via topology-aware rigid grid

Improving Combined Flow and Thermal Network Accuracy for Radially Air-Cooled Generators by Considering the Nonlinear Resistance Characteristics of T-Junction Flow

Utilizing Tait-Bryan Angles for Large Displacement Corotational Finite Element Static Analysis of Spatial Beams

Comparison of finite element methods for dynamic analysis about rotating flexible beam

TEMPERATURE-DEPENDENT PHYSICAL CHARACTERISTICS OF THE ROTATING NONLOCAL NANOBEAMS SUBJECT TO A VARYING HEAT SOURCE AND A DYNAMIC LOAD

Thermomechanical modeling in elastic body with corotated total Lagrangian SPH

Advanced Co-Rotational Procedure for Large Displacement Analysis of 2D Beam Element Using Vectorial Rotational Variables

Prediction of 3d Unsteady Flow and Heat Transfer in Rotating Cavity by Discontinuous Galerkin Method and Transition Model

A New Mesh Deformation Method Based On Disk Relaxation Algorithm With Pre-Displacement And Post-Smoothing

Similarity design method for dynamic characteristics of rotating composite blades in thermal environment

Coupled heat and mass transfer to viscoelastic fluid flow in a rotating frame using series and numerical solutions

Dynamic Rotation and Stretch Tensors from a Dynamic Polar Decomposition

A Co-Rotational Triangular Finite Element for Large Deformation Analysis of Smooth, Folded and Multi-Shells

A novel temporal finite element method to solve static viscoelastic problems

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires