Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

Preparation and Characterization of High-Performance Perfluorosulfonic Acid/SiO2 Nanofibers with Catalytic Property Via Electrospinning

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Pd/Au Based Catalyst Immobilization in Polymeric Nanofibrous Membranes via Electrospinning for the Selective Oxidation of 5-Hydroxymethylfurfural

Preparation of Fibrous SO42-/ZrO2-Nio Solid Acid Catalyst, Characterization and its Catalytic Properties

Preparation and Characterization of Nanofiber Catalyst Layer for Proton Exchange Membrane Fuel Cells

Preparation of Fibrous SO<sub>4</sub><sup>2-</sup>/ZrO<sub>2</sub>-Nio Solid Acid Catalyst, Characterization and Its Catalytic Properties

Effect of the Carbon Precursor on the Design of Perfluorosulfonic Acid Functionalized Carbon Catalysts

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Preparation and characterization of a novel class of solid acid catalyst nafion/SiO2

Preparation and Catalytic Performance of Perfluorosulfonic Acid-Functionalized Carbon Nanotubes

Preparation and characterization of anatase titanium dioxide fibre by electrospinning

Silk fibroin fibers supported with high density of gold nanoparticles: fabrication and application as catalyst

In situ synthesis of C–SiO2 enhanced Pd nanoparticles for catalytic dehydrogenation of formic acid

Preparation of CoFe 2 O 4 -Doped TiO 2 Nanofibers by Electrospinning and Annealing for Oxygen Electrocatalysis

Electrospun nanoscale iron oxide-decorated carbon fiber as an efficient heterogeneous catalyst for activating percarbonate to degrade Azorubin S in water

Fabrication of Porous Carbon Nanofibers from Polymer Blends Using Template Method for Electrode-Active Materials in Supercapacitor

Preparation of SiO2/PS superhydrophobic fibers with bionic controllable micro–nano structure via centrifugal spinning

Improvement of the hydrophilicity of electrospun porous carbon nanofibers by grafting phenylsulfonic acid groups

Sulfonic polymer catalysts for converting of furfural to high-value chemicals

Preparation and Characterization of Flexible and Thermally Stable CuO Nanocrystal-Decorated SiO2 Nanofibers

Enhancement of catalytic activity by homo-dispersing S2O82–-Fe2O3 nanoparticles on SBA-15 through ultrasonic adsorption