Static characterization of bump-type gas foil bearing： intergration of top foil 2-D thick plate model

刘占生,徐方程,张广辉,曹智选

DOI: https://doi.org/10.13224/j.cnki.jasp.2012.06.023

2012-01-01

Abstract:The 2-D （two-dimensional） thick plate finite element model for top foil was developed. By using coupled finite element mothod and finite difference method, the com- pressible gas lubricated Reynolds equation and the film thickness equation were solved cou- pling together. Predictions of minimum gas film thickness for increasing static loads at two speeds were obtained for bearing mid-plane and edge of bump-type gas foil bearing. The nu- merical results of this finite element model were compared with 1-D （one-dimensional） beam model model, 2-D shin shell model and test data. The results indicate that the minimum film thickness of three models agree well with test data at bearing min-plane, but at bearing edge, the accuracy of 2-D thick plate model is the highest due to its shear effect. 1-D beam model can not reflect film thickness variation along the bearing length direction because it on- ly considers the circumferential direction. The study in this paper established the theoretical foundation of dynamic characteristics research of bump-type gas foil bearing.