Abstract:The curved woven lattice truss sandwich (CWLTS) panels were developed, made, and tested as a type of lightweight composite structures utilized in aerospace, shipbuilding, rail transport and building engineering. Three‐point bending experiments indicated the effects of curving and foam‐filling on the deformation, damage, failure, and energy absorption under cylindrical and plated loadings. The woven lattice truss sandwich panels (WLTSPs) have been studied much, and this article proposes a new structure (curved woven lattice truss sandwich [CWLTS] panels). CWLTS were designed, made, and tested. The foam‐filling technique was applied to strengthen the CWLTS. Curving and foam‐filling effects to the deformation, damage, failure, and energy absorption under cylindrical and plated loadings were revealed by three‐point bending experiments. Under cylindrical loading, foam‐filling can effectively increase the load capacity, especially the CWLTS‐A. The load‐bearing capacity of the plated loading is greater than that of the cylindrical loading, and the phenomenon is significantly improved after foam filling, except for the central angle of 60° and the CWLTS‐A of 44.05°. Foam‐filling changes failure from core‐shearing to face fracture. For foam‐filled panels, the change in loading pattern results in energy absorption increase of 2.45 times for CWLTS‐B and 2.86 times for CWLTS‐A. Plated loading approximately doubles the peak load and energy absorption with two plastic hinges. The effect of foam filling on the mean crush force of the CWLTS plated loading is greater. The mechanical and energy absorption properties of the CWLTS can be improved by changing the loading mode and using foam filling, effectively increasing the applicability. Highlights Curved woven lattice truss sandwich panels were designed, made, and tested. Foam‐filling method greatly improves the bearing capacity of the CWLTS panels. Plated loading much increases the bearing capacity and energy absorption. The impact of curvature on mechanical performances is not immediately apparent.

Mechanical Property of Lattice Truss Material in Sandwich Panel Including Strut Flexural Deformation

Fabrication and mechanical behaviors of corrugated lattice truss composite sandwich panels

Mechanics of sandwich panels with a buckling-dominated lattice core: The effects of the initial rod curvatures

Experimental and Analytical Analysis of Mechanical Properties for Large-Size Lattice Truss Panel Structure Including Role of Connected Structure

Mechanical and Self-Monitoring Behaviors of 3D Printing Smart Continuous Carbon Fiber-Thermoplastic Lattice Truss Sandwich Structure

Mechanical Behaviors and Bending Effects of Carbon Fiber Reinforced Lattice Materials

Stiffness design, failure modes, and lightweight design of truss-lattice with filler sandwich plate under thermal loading

Crushing Behavior of Multi-Layer Metal Lattice Panel Fabricated by Selective Laser Melting

Foam-filling Techniques to Enhance Mechanical Behaviors of Woven Lattice Truss Sandwich Panels

Mechanical Strength of Triply Periodic Minimal Surface Lattices Subjected to Three-Point Bending

Nonlinear mechanical properties of lattice truss materials

Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle

DEVELOPMENT OF LATTICE MATERIALS WITH HIGH SPECIFIC STIFFNESS AND STRENGTH

Mechanical Properties And Design Of Lattice Composites And Structures

Curved woven lattice truss sandwich panels strengthened by foams: Designing, manufacturing, and testing

Manufacturing and Flexural Testing of Woven Lattice Sandwich-Ply Laminate Composites

Compression Property of a Novel Lattice Sandwich Structure

Mechanical performances of metal-polymer sandwich structures with 3D-printed lattice cores subjected to bending load

Mechanical properties and failure patterns of sandwich panels with AR-glass textile reinforced concrete face sheets subjected to quasi-static load

Compression behavior of strut-reinforced hierarchical lattice—Experiment and simulation

The Mechanical Properties Of Hierarchical Truss-Walled Lattice Materials