Abstract:Neat high-temperature vulcanized silicone rubber (HTV SR) showed bad hydrophobicity due to the existence of a large number of inorganic reinforcing fillers on its surface, which affected its security application in outdoor insulation systems. In this work, hydrophobic silane chains were grafted onto the surface of inorganic particles on the skin layer of HTV SR by a one-step coupling modification to improve its hydrophobicity. The effects of coupling agent types and coupling reaction conditions on the hydrophobicity of HTV SR were investigated. It was determined that the perfluorooctane trichlorosilicon with a large number of low surface energy fluorine atoms was the preferred coupling agent. The contact angle of HTV SR was increased by 15.70% when the optimal coupling reaction conditions were determined to be a reaction temperature of 60°C, a reaction time of 4 h, and an amount of coupling agent of 0.5%. The study found that both etching reaction and grafting reaction occurred during the whole coupling modification process, which led to the disappearance or decrease of a lot of holes on the HTV SR surface. After the fluorination coupling reaction, the surface of HTV SR became smooth and dense that led to the decrease of water absorption. The result of Fourier-transform infrared spectroscopy analysis showed the formation of C-F bond in HTV SR after fluorination modification, and the energetic dispersive spectroscopy analysis showed that the fluorine content on the surface of the fluorinated HTV SR increased significantly. Moreover, the stability analysis showed that the fluorinated HTV SR still had a good thermal stability and mechanical property stability.

Hydrophobicity Transfer Property of Silicone Rubber Material

Influence of Ambient Humidity on Hydrophobicity Transfer of Silicone Rubber Material

Influence of Temperature on the Hydrophobicity of Silicone Rubber Surfaces

Influence of Environmental Factors on Hydrophobicity Transfer Property of Silicone Rubber Material

Study of Hydrophobicity Migration of HTV and LSR Materials

Water absorption and water vapor permeation characteristics of HTV silicone rubber material

Investigation on Hydrophobicity Transfer Property of Silicone Rubber under Heavy Contamination

Study on Hydrophobicity Transfer of RTV Coatings Based on a Modification of Absorption and Cohesion Theory

Effects of Pollutions and Environmental Factors on the Performance of Hydrophobic Transference of Silicone Rubber

Moisture Absorption, Desorption, and Moisture-Induced Electrical Performances of High-Temperature Vulcanized Silicone Rubber

Preparation and mechanism research on hydrophobic coupling modification of HTV silicone rubber

Influence of Contamination on the Hydrophobic Properties of APPJ-treated Silicone Rubber

Effects of Liquids Immersion and Drying on the Surface Properties of HTV Silicone Rubber: Part I-contact Angle and Surface Chemical Properties

Test On Modified Rtv Coating For Hot And Humid Environment

Choices of Droplet size and measuring time on measuring hydrophobic angle of HTV silicone rubber

Effect of Plasma Jet on Hydrophobicity of Contaminated High Temperature Vulcanization Silicone Rubber

Description Method Ⅰfor Unobvious Hydrophobic State of Composite Insulators——Usability of Contact Angle Method

Hygrothermal ageing performance of high temperature vulcanised silicone rubber and its degradation mechanism

Investigation on Water Diffusion Property Into HTV Silicone Rubber

A Study on the Loss and Recovery of Hydrophobicity of RTV Coating

Absorption and Permeation of Water and Aqueous Solutions of High-Temperature Vulcanized Silicone Rubber