Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Compact quad-band bandpass filter using open- and short-stub-loaded resonators

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

A novel compact triple-passband filter design based on stepped impedance stub-loaded resonators

A Compact Quad-Band Bandpass Filter Based on Defected Microstrip Structure

Dual‐band Bandpass Filter Using Stepped‐impedance Stub‐loaded Hexagonal Stepped Impedance Resonator (SIR)

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Compact Quad-Band Bandpass Filter Using Quad-Mode Stepped Impedance Resonator and Multiple Coupling Circuits

Compact Quad‐ and Quint‐band BPFs Based on Multimode Stub Loaded Resonators

Compact Quad-Band BPF Using Quad-Mode Stub Loaded Resonators

A compact wide stopband microstrip bandpass filter using quarter-wavelength shorted coupled-lines

Design of New Compact Multi-Layer Quint-Band Bandpass Filter

Dual-band bandpass filter using centrally coupled resonators (CCRs)