Abstract:Tungsten oxide (WO3) is a strong candidate as the photoanode in photoelectrochemical (PEC) water splitting owing to its moderate band gap (2.6–3.2 eV) for wide light absorption and stable physicochemical properties. This work reports a morphology engineering strategy to fabricate voltage-induced terrace-like tungsten oxide (TW) film and its high-voltage performance as a photoanode for PEC water splitting. By controlling the anodization voltage, the morphology of the anodic WO3 film was altered, and their photoelectrochemical performances were compared. Anodization of the tungsten film in fluoride-containing H3PO4 leads to the growth of either irregular porous tungsten oxide layers or terrace-like tungsten oxide layers, depending on the anodic potentials. The possible growth mechanism of the porous oxide layer during anodization is proposed with a combination of the field-assisted dissolution model and the oxygen-bubble mold model. Under light irradiation, the photocurrent density was 3.0 mA cm–2 at 1.23 V vs RHE (VRHE) for annealed terrace-like WO3, which was almost 3 times larger than that of annealed porous WO3. As a photoanode, terrace-like WO3 films could generate hydrogen at 58 μmol cm–2 h–1 under simulated solar light, while porous WO3 films produced hydrogen with a slower rate of 28 μmol cm–2 h–1. The terrace-like WO3 films experience higher photoelectrochemical performance and incident photon-to-electron conversion efficiency (IPCE) than porous WO3 due to more regular nanostructure, smaller band gap, fast charge-transfer rate, and alleviated recombination rate. This study shows that morphology control can effectively enhance the photocurrent density and IPCE of photoanodes and suggests a practical direction for finding the optimal WO3 films for PEC water splitting.

Platelike Wo3 from Hydrothermal Rf Sputtered Tungsten Thin Films for Photoelectrochemical Water Oxidation

Facile preparation of platelike tungsten oxide thin film electrodes with high photoelectrode activity.

Hydrothermal Synthesis and Photoelectrochemical Properties of Vertically Aligned Tungsten Trioxide (hydrate) Plate-Like Arrays Fabricated Directly on FTO Substrates

Facile Fabrication of Sandwich Structured WO3 Nanoplate Arrays for Efficient Photoelectrochemical Water Splitting.

Nanoporous WO3 Films Synthesized by Tuning Anodization Conditions for Photoelectrochemical Water Oxidation

Ultrafast fabrication of nanostructure WO 3 photoanodes by hybrid microwave annealing with enhanced photoelectrochemical and photoelectrocatalytic activities

Oxygen-vacancy-induced photoelectrochemical water oxidation by platelike tungsten oxide photoanodes prepared under acid-mediated hydrothermal treatment conditions

Nanostructured WO3 films using high temperature anodization

Photoelectrochemical and physical properties of WO3 films obtained by the polymeric precursor method

Microstructure and photocatalytic properties of WO3/TiO 2 composite films by plasma electrolytic oxidation

Facile Synthesis of Tungsten Oxide Nanostructures for Efficient Photoelectrochemical Water Oxidation

High-Voltage Etching-Induced Terrace-like WO 3 Photoanode for Efficient Photoelectrochemical Water Splitting

Preparation and Photoelectrochemical Properties of Nano-Porous Tungsten Trioxide Films Electrode

Enhancing Photoelectrochemical Water Splitting by Aluminum-Doped Plate-Like Wo3 Electrodes

Plasma Assisted Pulsed Laser Deposition of WO3 Films for Thermochromism

One-Step Rapid and Scalable Flame Synthesis of Efficient WO3 Photoanodes for Water Splitting.

High-temperature anodized WO3 nanoplatelet films for photosensitive devices.

Preparation of Vertically Aligned WO3 Nanoplate Array Films Based on Peroxotungstate Reduction Reaction and Their Excellent Photoelectrocatalytic Performance

2700-induced photoelectrochemical water oxidation by platelike tungsten oxide photoanodes prepared under acid-mediated hydrothermal treatment conditions †

Nanoplate-Like Tungsten Trioxide (hydrate) Films Prepared by Crystal-Seed-Assisted Hydrothermal Reaction

Dense layers of vertically oriented WO 3 crystals as anodes for photoelectrochemical water oxidation