Abstract:Direct measurement of the wall pressure loading subjected to the near-field underwater explosion is of great difficulty. In this article, an improved methodology and a lab-scale experimental system are proposed and manufactured to assess the wall pressure loading. In the methodology, a Hopkinson bar (HPB), used as the sensing element, is inserted through the hole drilled on the target plate and the bar’s end face lies flush with the loaded face of the target plate to detect and record the pressure loading. Furthermore, two improvements have been made on this methodology to measure the wall pressure loading from a near-field underwater explosion. The first one is some waterproof units added to make it suitable for the underwater environment. The second one is a hard rubber cylinder placed at the distal end, and a pair of ropes taped on the HPB is used to pull the HPB against the cylinder hard to ensure the HPB’s end face flushes with loaded face of the target plate during the bubble collapse. To validate the pressure measurement technique based on the HPB, an underwater explosion between two parallelly mounted circular target plates is used as the validating system. Based on the assumption that the shock wave pressure profiles at the two points on the two plates which are symmetrical to each other about the middle plane of symmetry are the same, it was found that the pressure obtained by the HPB was in excellent agreement with pressure transducer measurements, thus validating the proposed technique. To verify the capability of this improved methodology and experimental system, a series of minicharge underwater explosion experiments are conducted. From the recorded pressure-time profiles coupled with the underwater explosion evolution images captured by the HSV camera, the shock wave pressure loading and bubble-jet pressure loadings are captured in detail at 5 mm , 10 mm , ... , 30 mm stand-off distances. Part of the pressure loading of the experiment at 35 mm stand-off distance is recorded, which is still of great help and significance for engineers. Especially, the peak pressure of the shock wave is captured.

A Stored Overpressure Measurement System Based on ICP Sensor for Shock Wave

Study on High Reliable Method for Saving Data of Intelligent Flow Measure System

Distributed Wireless Measurement System for Transient Pressure with Data Extraction Technology

Research on the Shock Wave Overpressure Peak Measurement Method Based on Equilateral Ternary Array

A Lab-Scale Experiment Approach to the Measurement of Wall Pressure from Near-Field under Water Explosions by a Hopkinson Bar

Numerical Simulation of Shock Wave Caused by Underwater Blasting

Design of pressure signal acquisition system based on STM32

Free-field shock-wave test method for meteorological air cannons

A detection and identification method of minor pressure pulse at high static pressure for pressure pulse bidirectional communication

Pressure Measurement Based on Multi-Waves Fusion Algorithm

Simulation and experiment of explosion shock wave in semi-closed environment

Environmental characteristics of underwater explosion source and application of PVDF pressure sensor

Shunt capacitor array shock wave position sensor

Research on thermal protection of piezoelectric pressure sensor for shock wave pressure measurement in explosion field

Live Demonstration: Wireless Intracranial Pressure Monitoring System Based on an Air Pressure Sensor.

Numerical simulation analysis of shock waves in closed cube explosion

Development of an FPGA-based multipoint laser pyroshock measurement system for explosive bolts

High-Temperature Resistance BiScO3–PbTiO3 Nanofiber Overpressure Sensor for Free-Field Shock Waves Testing

Analysis of data loss for down hole storage electronic pressure gauge and its treatment design

Detection of Shocks Generated by the Irradiation of Nanosecond Intense Pulsed Ion Beam and Electron Beam 1

Research on the suppression method of sensor impact vibration parasitic effects in surface reflection pressure measurement