Abstract:Track structures are apt to generate degradation under repeated loading of train traffic. Avariation of support stiffness is one of the main degradations, such as unsupported sleepers and the transition position from embankment to a bridge, which occurred frequently. The service performance of track will decline including the comfort index of passengers and the safety of train in these areas. In order to understand the control standard of track stiffness variation, various models have been used to analyze the amplification of dynamic responses of track by researchers. The coupling effect of train and track structure was considered unnegligible in some researches. In this paper, an updated numerical model is developed based on track dynamic theory, in which the CA mortar and concrete base are both taken into consideration. The results were compared with the finite element model ( FEM) results based on ABAQUS software, in which the train loads are assumed as a series of constant loads. From the comparison, the influence of train-track interaction was presented. When the track has no irregularity or degradation, the wheel-rail contact loads are nearly constant, and the dynamic responses of track structure are the same in these two models. But if there are track stiffness variations,the results in train-track interaction model are larger than that in FEM,which means that the train-track interaction has an intensive effect. Besides the differences of track responses, the FEM cannot reveal the variation of contact forces and train responses, which are also essential to summarize the control standard of track degradation. At last, based on the train-track interaction model, various conditions of track stiffness variation are analyzed and discussed.

Stiffness of a rectilinear suspension with automatic length compensation branches

Design of a rectilinear suspension with automatic length compensation branches

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Stiffness Design, Analysis and Validation of a Parallel-Mechanism Equivalent Suspension System

Static and Dynamic Stiffness Characteristics Analysis of Hydro-Pneumatic Suspension

Independent Suspension of Invariable Alignment Parameters by Using Flexible Links With Anisotropic Elasticity

Elastokinematics and Compliance of a Rectilinear Rear Independent Suspension

An Axial Semi-Rigid Connection Model for Cross-Type Transverse Branch Plate-to-chs Joints

Comparative Analysis on a Rectilinear Independent Suspension with Traditional Ones

Synthesis of a Rectilinear Independent Rear Suspension and Experiment Research

The Concept Design and Dynamics Analysis of A Novel Vehicle Suspension Mechanism with Invariable Orientation Parameters

Synthesis of A Rear Wheel Suspension Mechanism with Pure Rectilinear Motion

Design and Dynamics Simulation of a Rectilinearly Guided Front Independent Suspension and its Steering Linkage

Kinematics and K&C Experiment of a Rectilinear Rear Independent Suspension

Longitudinal Stiffness of Multispan Suspension Bridges

Synthesis of Rectilinear Motion Generating Spatial Mechanism with Application to Automotive Suspension

Stiffness design and mechanical performance analysis of transverse leaf spring suspension

Dynamic Stiffness of a Lift Mechanism for Forklift Truck

Study on the Component-Based Model of Semi-Rigid Beam-to-column Joints Initial Stiffness

Stiffness Modeling Approach for a 3-DOF Parallel Manipulator with Consideration of Nonlinear Joint Stiffness

Stiffness modeling of n(3RRlS) reconfigurable series-parallel manipulators by combining virtual joint method and matrix structural analysis