Abstract:Abstract A floating raft is a complicated multilayer vibration isolation system, which is often simplified as a two-degree-of-freedom viscous damping system in analysis. In order to research the influences of the hysteretic damping and the raft flexibility on the vibration isolation effect, a three-degree of freedom hysteretic mechanical model of the floating raft is established, and the impedance method is adopted to deduce the model of the force transmissibility of the floating raft. The analytic calculation methods of force transmissibility are given aiming at the low-frequency range, the resonance range, and the high-frequency range, respectively. Finally, the influence rules of damping, mass, and stiffness on force transmissibility are analyzed aiming at the value range of parameters of most floating rafts. The main analysis conclusions are listed as follows: the analytic calculation equation for resonance frequency and resonance peak is accurate; the vibration isolation effect of the high frequency range is determined by the entire floating raft, the unconstrained raft, the inherent frequency of the equipment, the mass ratio between the raft and the equipment only; the hysteretic damping can reduce the force transmissibility at the place of the resonance frequency of the floating raft, which shall be maximized; the increase in the mass of the raft will reduce the force transmissibility during the frequency range above the inherent frequency of the equipment, but it will reduce the marginal benefit; the reduction in the stiffness of the isolator or the raft will reduce the force transmissibility during the frequency range above the inherent frequency of the equipment, and will increase the displacement of the equipment; with limited displacement, it is better to design the isolator and the raft according to the principle of equal stiffness.

Power Flow Estimation of Float Raft Isolation System

Power Flow Analysis of Floating Raft Systems with Dynamic Vibration Absorbers

Electrical Endurance Design of Multi-Operation Isolators Using Semi-Physical Simulation Via Algebraic Multigrid Iteration

Analytical approach of vibration isolation effect for floating raft system

Study on characteristics of ship floating raft vibration isolation system based on FEM

Study on power flow characteristics of isolation system based on flexible foundation

Analysis of Vibration Power Flow from a Vibrating Machinery to a Floating Elastic Panel

Modeling and Numerical Simulations of an Active Vibration Isolation Module by the Power Flow Analysis

The Assessment of Active Vibration Isolation Performance of Rotating Machinery Using Power Flow and Vibrational Energy: Experimental Investigation

Calculation of Vibratory Power Transmission of Complex Floating Raft System by FEM

Power Flow Level Difference Finite Element Analysis

Dynamic analysis and experimental investigation of particle damping for the vibration reduction and isolation of floating raft using the two-phase flow theory of gas-particle

Analysis and Experiment on Vibration Isolation Characteristics of a Periodic Truss Raft System

Tests for an active floating raft vibration isolation system based on a flexible hull structure

Tests for power flow measurement and vibrational energy estimation

Research on the three degrees of freedom hysteretic mechanical model of floating rafts

Vibration isolation characteristics analysis of a floating raft system constructed with periodic truss structures

The Vibration Isolation Effect Research Of The Floating Raft Isolation System Based On The Adjustable Flexibility Of Foundation

Performance enhancement of floating raft system by exploiting geometric nonlinearity and motion constraint in vibration isolators

Application of Dynamic Vibration Absorbers in Floating Raft System

Dynamic Modeling and Characteristic Analysis of Floating Raft System with Attached Pipes