Abstract:Metal additive manufacturing (AM) processes, such as laser powder bed fusion (L-PBF), can yield high-value parts with unique geometries and features, substantially reducing costs and enhancing performance. However, the material properties from L-PBF processes are highly sensitive to the laser processing conditions and the resulting dynamic temperature fields around the melt pool. In this study, we develop a methodology to measure thermal gradients, cooling rates, and solidification velocities during solidification of refractory alloy C103 using in situ high-speed infrared (IR) imaging with a high frame rate of approximately 15,000 frames per second (fps). Radiation intensity maps are converted to temperature maps by integrating thermal radiation over the wavelength range of the camera detector while also considering signal attenuation caused by optical parts. Using a simple method that assigns the liquidus temperature to the melt pool boundary identified ex situ, a scaling relationship between temperature and the IR signal was obtained. The spatial temperature gradients (dT/dx), heating/cooling rates (dT/dt), and solidification velocities (R) are resolved with sufficient temporal resolution under various laser processing conditions, and the resulting microstructures are analyzed, revealing epitaxial growth and nucleated grain growth. Thermal data shows that a decreasing temperature gradient and increasing solidification velocity from the edge to the center of the melt pool can induce a transition from epitaxial to equiaxed grain morphology, consistent with the previously reported columnar to equiaxed transition (CET) trend. The methodology presented can reduce the uncertainty and variability in AM and guide microstructure control during AM of metallic alloys.

Identification Of Phase Transformation Using Optical Emission Spectroscopy For Direct Metal Deposition Process

Optical Identification of Materials Transformations in Oxide Thin Films

Revealing in-situ phase transition during laser additive manufacturing via high-speed synchrotron X-ray diffraction and imaging

Identification of characteristic extracellular ninhydrinpositive substances produced by some bacteria.

Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel

A Comprehensive Transformation-Thermomechanical Model on Deformation History in Directed Energy Deposition of High-Speed Steel

Deep Learning Analysis of Defect and Phase Evolution During Electron Beam Induced Transformations in WS2

Development of computational framework for titanium alloy phase transformation prediction in laser powder-bed fusion additive manufacturing

Real-Time Diagnostics of 2D Crystal Transformations by Pulsed Laser Deposition: Controlled Synthesis of Janus WSSe Monolayers and Alloys.

In situ measurement of austenite grain growth and recrystallization using laser ultrasonics

Laser-metal interaction dynamics during additive manufacturing resolved by detection of thermally-induced electron emission

Insights into the application of flat-top laser in selective laser melting processed Inconel 738: simulation of solid-state phase transformation

Advancing characterisation with statistics from correlative electron diffraction and X-ray spectroscopy, in the scanning electron microscope

Processing-microstructure relationships in ferrous alloys via mixed powder laser powder bed fusion

Resolving thermal gradients and solidification velocities during laser melting of a refractory alloy

A Fast Method to Diagnose Phase Transition from Amorphous to Microcrystalline Silicon

Hybrid laser micro/nanofabrication of phase change materials with combination of chemical processing

Harnessing transformation optics for understanding electron energy loss and cathodoluminescence

In-situ Monitoring and Deformation Characterization by Optical Techniques; Part I: Laser-aided Direct Metal Deposition for Additive Manufacturing

Direct mechanistic connection between acoustic signals and melt pool morphology during laser powder bed fusion

Three-dimensional non-isothermal phase-field modeling of microstructure evolution during selective laser sintering