Abstract:For LED color-mixing, the different color LEDs need to be controlled independently, so a fully decoupled current control and current balancing of the modular structure is proposed for LED color-mixing system. The capacitive current-balancing structure is combined with the quasi-boost converter to realize the decoupled current control and current balancing in each module. The capacitive current-balancing structure is based on the relative reactance of the capacitor with respect to the equivalent resistance of the associated LED string. The inductor in quasi-boost converter is used to further stable the output current flowing through each LED string, and the switch in quasi-boost converter for controlling the current of each LED string adopts the parallel connection to protect LEDs from the current-spike caused by the switch. The structure is modularity and scalability so that the different color LEDs can be added and removed easily. Compared with SIMO (Single-Inductor-Multiple-Output) structure, the proposed structure has no cross-coupling issues. The LED string currents working with PWM mode have a good current-balancing performance since the equivalent resistance of LED string is much smaller than the reactance of capacitors. In addition, the resonant capacitors separate the grounds of the power source and LED strings, so all the switches in parallel with LED strings do not need the isolated gate drivers. A prototype with RGB modules has been built and evaluated, and the experimental results have a good agreement with the theoretical analysis.

Novel Self-Configurable Current-Mirror Techniques for Reducing Current Imbalance in Parallel Light-Emitting Diode (LED) Strings

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A Constant Current LED Driver Based on Flyback Structure with Novel Primary Side Control

A Family of Capacitive Current Balancing Methods for Multi-Output LED Drivers

High Efficiency Hybrid Current Balancing Method for Multi-Channel LED Drive

A Novel Passive Current Balancing Circuit for Multiple LED Strings of High Power Application

Paralleled LED Strings: an Overview of Current-Balancing Techniques

A Simple Current Balancing Method For Multi-Output Flyback Led Driver

A precise passive current balancing method for multioutput LED drivers

A Capacitor-Isolated Led Driver with Inherent Current Balance Capability

A Digital Self-Current-Sharing Method for Modular Parallel High Step-Down LLC System

Total Harmonic Distortion Adjustment Method and Circuit for LED AC Direct Driver IC

Fully Decoupled Current Control and Current Balancing of the Modular Structure for LED Color-Mixing System.

High efficiency quasi-two-stage converter with current balancing for multi-channel LED drive based on AC bus

Hybrid passive current sharing method for multi-channel SRC LED driver

A Ring Diode-Capacitor Network for Current-Balancing Multiple LED Strings

Series–Parallel Autoregulated Charge-Balancing Rectifier for Multioutput Light-Emitting Diode Driver

A novel high efficiency and low-cost current balancing method for multi-LED driver

A Novel Current Mirror Sensing Based Current Balance Method for Multi-Phase Buck DC-DC Converter

Analysis and Design of LLCC Resonant Four-Channel DC-DC LED Driver with Current Sharing Transformer

A High-Efficiency Quasi-Two-Stage LED Driver with Multichannel Outputs.