Abstract:Three dimensional (3D) overhead crane is a typical multi-input multi-output (MIMO) and underactuated mechatronic system. Complex double spherical pendulum dynamics and varying cable length increase the difficulty of the swing suppression control for overhead crane. Moreover, it would be a great challenge for considering friction uncertain and overshoot issues of the actuators. In this article, an adaptive anti-swing controller is proposed for seven degrees of freedom (7-DOF) overhead crane with double spherical pendulum and varying cable length. First, we use Lagrange’s method to establish an accurate dynamic model of 7-DOF overhead crane. The complex nonlinear dynamic model includes trolley moving, bridge moving, cable length varying, hook swing and payload swing in 3D space. Then, by analysis the system energy function, an adaptive control method is designed to control the trolley, bridge and suspension cable simultaneously. Moreover, we elaborately design some nonlinear terms (such as overshoot limiting term, adaptive term and anti-swing term), which can be used to handle the actuator overshoots, friction uncertain and unactuated swing suppression. As far as we know, it is the first nonlinear closed-loop controller for 7-DOF overhead crane without any linearization. Finally, a group of the hardware experiment results prove that the proposed adaptive anti-swing controller has better effectiveness and robustness than the existing state-of-the-art controllers. Note to Practitioners—This paper studies the anti-swing control problem of the 7-DOF overhead crane system. To improve the efficiency of overhead crane, the trolley moving, the bridge moving and the payload hoisting/lowing are carried out simultaneously in practice. Due to the complex dynamics of the double spherical pendulum and varying cable length, the anti-swing control of the 7-DOF crane remains an open problem. Moreover, most existing control methods ignore the friction uncertain and actuator overshoot, which is not feasible in practice. To tackle these problems, this paper designs a novel adaptive anti-swing controller, which can solve the issues of friction estimation, overshoot limitation, actuators positioning while suppressing the unactuated swing in the 7-DOF overhead crane system. The control performance of the proposed anti-swing controller is verified on the self-build 7-DOF overhead crane platform in the laboratory. In the future, the proposed anti-swing controller will be applied in the industrial overhead crane system to improve the control performance.

The Swing Control of Cranes with Variable Rope Length Based on Linear Time Varying System Theory

Robust Stabilization for a Class of Uncertain Time-Delay Linear System Based on Variable Structure

PID-like Coupling Control of Underactuated Overhead Cranes with Input Constraints

State Constrained Variable Structure Control for Active Heave Compensators.

Nonlinear Antiswing Control for Crane Systems With Double-Pendulum Swing Effects and Uncertain Parameters: Design and Experiments

Anti-swing Control for 2-D Under-Actuated Cranes with Load Hoisting/lowering: A Coupling-Based Approach.

Decoupled linear model and S-shaped curve motion trajectory for load sway reduction control in overhead cranes with double-pendulum effect

Research on adaptive coupling trajectory tracking anti-swing control strategy for three-dimensional double-pendulum overhead crane

Research on anti-swing control strategies for three-dimensional overhead cranes with non-stationary enhanced swing angle suppression

Sliding Mode Observation and Control for Overhead Cranes with Varying Rope Length

Modeling and energy-based sway reduction control for tower crane systems with double-pendulum and spherical-pendulum effects

Anti-swing control of varying rope length tower crane based on adaptive neural network sliding mode

Tracking control design for a multi-degree underactuated flexible-cable overhead crane system with large swing angle based on singular perturbation method and an energy-shaping technique

Anti-Sway Adaptive Fast Terminal Sliding Mode Control Based on the Finite-Time State Observer for the Overhead Crane System

Variable structure control of time-variant linear time-delay singular system

Design of Load's Anti-Swing Control System of Overhead or Gantry Crane Based on DSP

Adaptive Anti-Swing Control for 7-DOF Overhead Crane With Double Spherical Pendulum and Varying Cable Length

Linear Active Disturbance Rejection Control for Double-Pendulum Overhead Cranes

A novel payload swing control method based on active disturbance rejection control for 3D overhead crane systems with time-varying rope length

Modeling and H∞ Position Control of a Spreader in the Gantry Crane

Modeling and vibration suppression for overhead crane in planar space with nonlinear time-varying actuator faults and uncertain control directions