Abstract:Soft glass fibers can transmit the wavelengths longer than 2μm, which can realize the sensors in mid-infrared waveband. Compared to the FBG sensors based on silica fibers, FBG sensors based on soft glass fibers have the advantages of high sensitivity. For the first time, the sensing characteristics of FBGs based on different soft glass fibers are analyzed and compared. The sensing characteristics of temperature, strain and pressure of FBGs based on tellurite, chalcogenide and fluoride fibers are numerically simulated and compared. By analyzing and comparing a series of sensitivity curves of FBGs, we get some conclusions. For temperature sensing, the FBG based on the As2S3 fiber has the highest sensitivity coefficient of 175.7 pm/°C, while the FBG based on the silica fiber has the lowest sensitivity coefficient of 11.3 pm/°C. The Bragg wavelengths are red-shifted with the increase of temperature. For strain sensing, the FBG based on the β-ZnS (CVD) fiber has the highest strain sensitivity coefficient of 2.76 pm/με, while the FBG based on the silica fiber has the lowest strain sensitivity coefficient of 1.22 pm/με. The Bragg wavelengths are red-shifted with the increase of strain. For pressure sensing, the pressure sensitivity of the FBG based on the As2S3 fiber is the highest and the Bragg wavelength has is red-shifted; the pressure sensitivity of the FBG based on the silica fiber is the lowest and the Bragg wavelength is blue-shifted. These results will be significant for optical sensing and fiber lasers in mid-infrared waveband.

Numerical Responsive Characteristics of Fiber Bragg Grating Refractive Index Sensors under Uneven Liquid Medium

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Highly sensitive fiber Bragg grating refractive index sensors

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

The response of side-polished FBG to external refractive index

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Design and Characteristics of Refractive Index Sensor Based on Thinned and Microstructure Fiber Bragg Grating

Power-type Liquid-Level Sensor for High Refractive Index Liquid Based on Long-Period Fiber Grating

High sensitivity refractive index sensor based on tilted fiber Bragg gratings

Core-Offset-Based Fiber Bragg Grating Sensor for Refractive Index and Temperature Measurement

Optic Sensors of High Refractive-Index Responsivity and Low Thermal Cross Sensitivity That Use Fiber Bragg Gratings of >80 Degrees Tilted Structures.

Employing Higher Order Cladding Modes of Fiber Bragg Grating for Analysis of Refractive Index Change in Volume and at the Surface

Temperature compensated highly sensitive refractive index sensor based on Mach-Zehnder interferometer and FBG

Investigation on Sensing Characteristics of Fiber Bragg Gratings Based on Soft Glass Fibers

Microfluidic Refractive-Index Sensors Based On Small-Hole Microstructured Optical Fiber Bragg Gratings

Refractive Index Sensing by Using Mechanically Induced Long-Period Grating

Investigation on Refractive Index Sensing Characteristics of Pressure-Induced Long-Period Fiber Grating Written in a Single-Mode Fiber

Influence Of Refractive Index On Spectral Characteristics Of Tilted Fiber Gratings

Optical Refractive-Index Sensor Based on Dual Fiber-Bragg Gratings Interposed with a Multimode-Fiber Taper

Research on sensitive characteristics of tilted fiber grating sensors

A refractive index sensor based on micro-nano fiber with chirped fiber Bragg grating embedded for a microfluidic chip