Abstract:We propose a novel laser configuration that can output 3.5-$\mu$m nanosecond laser pulses based on a simple and monolithic fiber structure. Cascade-gain-switching, which converts the wavelength of nanosecond pulses from 1.55 $\mu$m to 3.5 $\mu$m by two successive gain-switching processes. Instead of using expensive pump sources at special wavelengths and bulky active or passive modulation elements for Q-switching or mode-locking, the cascade gain-switching only requires the pumping of an electric-modulated 1.55-$\mu$m pulsed laser and two continuous-wave (CW) 975-nm laser diodes. They are all standard products for fiber optic communication applications, which can greatly lower the cost of mid-infrared laser pulse generation. To investigate the feasibility of this configuration, we numerically simulated the cascade-gain-switching processes by comprehensive rate-equation models. In single-shot regime, for stable 3.5-$\mu$m pulsed lasing, the CW 975-nm pump should be turned on at least $\sim500$ $\mu$s ahead of the 1.55-$\mu$m pulsed pump. It shows that the pulse width of the 1.55-$\mu$m pump has major impact on the temporal shape of the intermediate 1.97-$\mu$m pulse while has neglected influence on the generated 3.5-$\mu$m pulse. On the other hand, increasing the CW pump power can significantly improve the output peak power and shorten the pulse when the pump power is less than $\sim4$ W. In the repetitive-pulse regime, we found the 3.5-$\mu$m pulse train can be stably outputted when the repetition rate is $<=100$ kHz. As the repetition rate increases, the duration of reaching the stable operation increases. When the repetition rate is large than 100 kHz, the stable operation cannot be established because the rate of consuming the population on the $^4I_{11/2}$ level of $Er^{3+}$ ions is faster than the rate of building the population.

Tuned Cascade Laser

A tunable Q -switched Ho 3+ -doped fluoride fiber laser

Dual Wavelength Q-switched Cascade Laser.

Diode Pumped Erbium Cascade Fiber Lasers

Modeling and Optimization of Cascaded Erbium and Holmium Doped Fluoride Fiber Lasers

Mid-infrared Tunable Interband Cascade Laser Employing Double-Trench Waveguide Structure with a Tuning Range of 118 Nm

Single-mode Interband Cascade Laser Based on V-coupled Cavity with 210 Nm Wavelength Tuning Range Near 3 Μm.

High-power Diode-Pumped Fiber Laser Operating at 3 Μm

Q-switched Induced Gain Switching of a Two-Transition Cascade Laser.

Quasi-Continuous Wavelength Tuning of Single-mode Interband Cascade Lasers Based on V-coupled Cavity

Double Half-Wave-Coupled Rectangular Ring-Fp Laser With 35x100ghz Wavelength Tuning

Ultra-wide Wavelength Tuning of a Cascaded Raman Random Fiber Laser.

Modeling and Optimization of Cascaded Lasing in a Holmium Doped Fluoride Fiber Laser with Efficient Output at 3.92 Μm.

Theoretical Study on Cascade Energy-Transfer Pumping Heavily Holmium-Doped Fluoroindate Fiber Laser At-4 Μm with High-Efficiency

Mid-infrared Widely Tunable Single-Mode Interband Cascade Lasers Based on V-coupled Cavities.

Single-Mode Tunable Interband Cascade Laser Emitting at 3.4 Μm with a Wide Tuning Range over 100 Nm

High Power Cascaded Erbium Doped Fluoride Fiber Laser at Room Temperature

Cascade-gain-switching for generating 3 . 5-μ m nanosecond pulses from low-cost monolithic fiber lasers

Cascade-gain-switching Hybrid-Pumping for Generating 3.5-Um Nanosecond Pulses from Monolithic Fiber Lasers

Cascade-gain-switching for generating 3.5-um nanosecond pulses from monolithic low-cost fiber lasers

Widely Tunable Single-Mode Mid-Infrared Interband Cascade Lasers