Abstract:Multiwalled carbon nanotubes (MWNTs) are functionalized covalently with ionic liquid (IL, 3-aminoethyl imidazolium bromide) which helps good dispersion of IL-functionalized MWNTs (MWNT-IL) in the poly(vinylidene fluoride) (PVDF) matrix. Analysis of transmission electron microscopy (TEM) micrographs suggests ∼10 nm coating thickness of MWNTs by ILs, and the covalent linkage of ILs with MWNTs is confirmed from FT-IR and Raman spectra. PVDF nanocomposites with full β-polymorphic (piezoelectric) form are prepared using MWNT-IL by both the solvent cast and melt-blending methods. The FE-SEM and TEM micrographs indicate that IL-bound MWNTs are homogeneously dispersed within the PVDF matrix. Increasing MWNT-IL concentration in the composites results in increased β polymorph formation with a concomitant decrease of the α polymorph, and a 100% β polymorph formation occurs for 1 wt % MWNT-IL in both the fabrication conditions. A differential scanning calorimetry (DSC) study shows that the MWNT-ILs are an efficient nucleating agent for PVDF crystallization preferentially nucleating the β form due to its dipolar interactions with PVDF. The glass transition temperature (T(g)) gradually increases with an increase in MWNT-IL concentration, and the storage modulus (G') of the composites increases significantly, showing a maximum increase of 101.3% for 0.5 wt % MWNT-IL. The Young's modulus increases with MWNT-IL concentration, and analysis of the data using the Halpin-Tsai equation suggests that at low concentration they adopt an orientation parallel to the film surface; however, at higher MWNT-IL concentration it is randomly oriented. The tensile strength also increases with an increase in MWNT-IL concentration, and both the Young's modulus and the tensile strength of solvent cast films are lower than melt-blended samples. The elongation at break in the solvent cast samples shows a maximum, but in melt-blended samples it decreases continuously with increasing MWNT-IL concentration. The composites exhibit a very low conductivity percolation threshold at 0.05 wt %, and the three-dimensional conducting network is produced. Higher conductivity (∼1 S/cm for 1% MWNT-IL) than other MWNT/PVDF composites has been attributed to the anchored ionic liquid.

Multifunctional Role of an Ionic Liquid in Melt-Blended Poly(Methyl Methacrylate)/Multi-Walled Carbon Nanotube Nanocomposites

Impact of Ionic Liquid-Modified Multiwalled Carbon Nanotubes on the Crystallization Behavior of Poly(vinylidene Fluoride).

Epoxy-based Ionic Liquid Towards Multi-Walled Carbon Nanotubes/polybutylene Terephthalate Composite with Excellent Dispersion and Conductivity Behaviors

Influence of Ionic Liquid on Glass Transition, Dynamic Rheology, and Thermal Stability of Poly(methyl Methacrylate)/silica Nanocomposites

A Facile Route to Prepare High−performance Dielectric Nanocomposites of Poly(methyl Methacrylate)/poly(vinylidene Fluoride)/carbon Nanotubes

Improving the Filler Dispersion of Polychloroprene/carboxylated Multi-Walled Carbon Nanotubes Composites by Non-Covalent Functionalization of Carboxylated Ionic Liquid

Effect of the selective localization of carbon nanotubes and phase domain in immiscible blends on tunable microwave dielectric properties

Performance improvement of poly(butylene adipate-butylene terephthalate) based nanocomposites modified by the cooperation of nano montmorillonite and ionic liquid

Poly(vinylidene fluoride)-assisted melt-blending of multi-walled carbon nanotube/poly(methyl methacrylate) composites

The Poly(Urethane-Ionic Liquid)/Multi-Walled Carbon Nanotubes Composites

Improved mechanical and dielectric properties of PLA/EMA-GMA nanocomposites based on ionic liquids and MWCNTs

Selective Localization Of Multiwalled Carbon Nanotubes In Poly(Epsilon-Caprolactone)/Polylactide Blend

Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend

Ionic liquid integrated multiwalled carbon nanotube in a poly(vinylidene fluoride) matrix: formation of a piezoelectric β-polymorph with significant reinforcement and conductivity improvement

Interfacial Distribution of PMMA-grafted MWCNTs in Immiscible Blends for Improved Electrical Conductivity

Preparation and Characterization of Composite Membranes with Ionic Liquid Polymer-Functionalized Multiwalled Carbon Nanotubes for Alkaline Fuel Cells

Epoxy/ionic Liquid-Like MWCNTs Composites with Improved Processability and Mechanical Properties

Improving Mechanical Performance of Immiscible Polypropylene/poly(methyl Methacrylate) Blends by Adding Calcium Carbonate Nanoparticles with Bifunctions of Compatibilization and Β-Nucleation

Preparation, Structure, and Properties of Chitosan/cellulose/multiwalled Carbon Nanotube Composite Membranes and Fibers

Effect of ionic liquid modified carbon nanotubes on the properties of nitrile butadiene rubber and nitrile butadiene latex nanocomposites

Effect of Na+ MMT-ionic Liquid Synergy on Electroactive, Mechanical, Dielectric and Energy Storage Properties of Transparent PVDF-based Nanocomposites