Abstract:Fire hazard-risk area in small coal pits can be found in the southern part of the Shigetai Coal Mine, a close-distance coal seam mining sector in the Shendong mining area, which is susceptible to the risk of harmful toxic gas intrusion, seriously threatening the safety of mining around the working surface. Aiming at this problem, a numerical model representing the mining activity on the close-distance coal seams was established to simulate the movement pattern of overlying strata and the development process of fractures based on the horizontal stress “normalization” technology. Also, the principal air-leak passageways were detected with the SF6 tracer analysis. On this basis, the influencing pattern of harmful toxic gas intruding into the working surface can be comprehensively analyzed, providing a basis for effectively preventing and controlling gas intrusion disasters. The research findings show that, after a lower coal seam has been mined, the caving zone ranges from 73 m to 94 m in height, and the fractured zone tends to develop all the way to the surface. Furthermore, shear fractures are the major passageways for air leakage, and the occurrence of gas intrusion disasters is basically taking place at the same time frame as the occurrence of roof weighting. Meanwhile, the harmful toxic gas intrudes the working surface through the fractures on the security coal pillars and shear fractures on the overlying strata. To prevent intrusion disasters from occurring, the applications of inorganic foaming and curing materials for filling were studied in combination with the actual engineering conditions. The construction grounds in sections where the fire hazard-risk area in small coal pits have not been stripped were drilled, and filling materials were poured into the goaf to create an isolation belt. As can be observed from the applied areas, constructing isolation belts to block the major air-leak passageways can effectively prevent the harmful toxic gases from intruding into the working surface, ensuring the safety of mining on the working surface.

Design of Underground Coal Mine Refuge Chamber

Study on CO dispersion characteristics and isolation door control technology of refuge chamber in coal mine

Calculation of human body respiration and metabolic heat and moisture in Mine Refuge Chamber

Purification Characteristic Research of Carbon Dioxide in Mine Refuge Chamber

Study on External Protective System of Waterproofing Refuge Chamber in Guilaizhuang Gold Mine

Structure Analysis and Design of Coal Mine Refuge Chamber

Study on oxygen supply system of mine refuge haven

Retraction Notice: Study and Analysis of Human Survival Parameters in Mine Refuge Station

Study On Chemical Oxygen Source In Underground Emergency Refuge System

Study on the way of dehumidification for mine refuge chamber

Prevention and Control Technology for Harmful Toxic Gas Intrusion in High-Fire-Hazard-Risk Areas of Close-Distance Coal Seams

CFD modelling of ventilation optimization for improving mine safety in longwall working faces

Study on air distribution characteristics and human thermal comfort of the refuge station under forced air supplying condition

Numerical analysis and control technology of gas accumulation in a large-scale specially-shaped tunnel passing through coal bearing strata

Design and research of life-saving cotton-blended miners’ clothing

Applying similar modeling to study vehicle exhaust transport in a confined mining space

Study on emergency escape route planning under fire accidents in the Burtai coal mine

Underground space utilization of coalmines in China: A review of underground water reservoir construction

Distribution and Prevention of CO in a Goaf of a Working Face with Y-Type Ventilation

Application of ventilation simulation to spontaneous combustion control in underground coal mine: A case study from Bulianta colliery

A Study on the Transient Response of Compressed Air Energy Storage in the Interaction between Gas Storage Chambers and Horseshoe-Shaped Tunnels in an Abandoned Coal Mine