Abstract:The influence of a high axial magnetic field (up to 6 T) on the solidification structure and crystallography in directionally solidified Al-21.5 wt%Cu-27 wt%Ag and Al-17.6 wt%Cu-42.2 wt%Ag ternary alloys has been systematically studied. Both alloys followed its own typical solidification processes: two-phase univariant eutectic growth (L ->alpha-Al+Al2Cu) and three-phase invariant eutectic growth (L ->alpha-Al-FAl2Cu+Ag2Al) for Al-21.5 wt%Cu-27 wt%Ag and Al-17.6 wt%Cu-42.2 wt%Ag, respectively. It is found that the solidification structure and the orientation relationship (OR) between eutectic phases are modified at lower growth speeds (R <= 3 mu m/s) under the magnetic field (B >= 2 T). For univariant eutectic growth, the magnetic field refines eutectic cell and promotes the transform from cellular structure to planar structure, whereas for invariant eutectic growth, the magnetic field reduces the eutectic spacing and causes the formation of banded structure at lower growth speeds (R <= 0.8 mu m/s). The magnetic field enhances the richness of the Ag solute in the liquid ahead of the quenched liquid/solid interface. In additiOn, the magnetic field modifies the preferred OR between Al2Cu and Ag2Al eutectic phases at lower growth speeds (R <= 3 mu m/s) and induces the formation of the OR with higher interface energy. Modifications of the solidification structure and the OR under the magnetic field are attributed to the thermoelectric magnetic (TEM) effects and the changes in the interfacial energy caused by the magnetic field. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Effect of cusp magnetic field on CdZnTe crystal growth by detached solidification

Effect of a Traveling Magnetic Field on Cadmium Zinc Telluride Growth by the Traveling Heater Method

Effects of cusp-shaped magnetic field on melt convection and oxygen transport in an industrial CZ-Si crystal growth

Effect of a High Magnetic Field on the Growth of Ε-Cuzn5 Dendrite During Directionally Solidified Zn-rich Zn–Cu Alloys

Magnetic-field effect on MCT crystal composition distribution

Effects of static magnetic fields on thermal fluctuations in the melt of industrial CZ-Si crystal growth

Effect Of Magnetic Field On The Spin-Peierls Transition In Single-Crystal Cugeo

Melt Convection and Temperature Distribution in 300 Mm Czochralski Crystal Growth with Transverse Magnetic Field

Faceted Growth Of Primary Al2cu Crystals During Directional Solidification In High Magnetic Field

Effect of a transverse magnetic field on the growth of equiaxed grains during directional solidification

Effect of a High Magnetic Field on the Growth of Ternary Al-Cu-Ag Alloys During Directional Solidification

CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES: Effect of magnetic field on the spin-Peierls transition in single-crystal CuGeO

Effect of a Low Axial Magnetic Field on the Primary Al2Cu Phase Growth in a Directionally Solidified Al–Cu Hypereutectic Alloy

Magnetic Field-Enhanced Thermoelectric Performance in Dirac Semimetal Cd3As2 Crystals with Different Carrier Concentrations

Numerical analysis of Cd1−xZnxTe crystal growth by the vertical Bridgman method using the accelerated crucible rotation technique

Effects of High Static Magnetic Field on Crystal Orientation and Magnetic Property of Bi-5wt.% Zn Alloys

Effect of Magnetic Field Configuration on Stray-Crystal Formation with Different Platform Sizes during Directional Solidification of Single-Crystal Superalloy

Studies on Thermal and Interface Optimization for CdZnTe Crystals by Unseeded Traveling Heater Method

Analysis of the Effects of A Rotating Magnetic Field on the Growth of Cadmium Zinc Telluride by the Traveling Heater Method under Microgravity Conditions

Effect of crystal rotation on the instability of thermocapillary–buoyancy convection in a Czochralski model

EFFECT OF HIGH LONGITUDINAL MAGNETIC FIELD ON THE MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED Al-4.5%Cu ALLOY