Abstract:Impact protection structures are required to efficiently use material and provide maximum energy absorbing capability. When using plate structures against out-of-plane impact, most impact energy is dissipated near the impact area, resulting in low use efficiency of material. In this study, material distribution is analyzed to reveal its influence on intrusion in the out-of-plane direction and dynamic response in the transverse direction in plate structures. First, partitioning a plate into two plates along the thickness direction, mechanisms of dynamic response in the out-of-plane direction are studied. The upper plate takes impact from intruding object and the lower plate serves as delayed defense when the two plates contact and interact to each other. There exists optimal configuration range of the thickness partition and the gap between the plates for minimizing intrusion. The configuration determines contribution to energy absorption by membrane deformation. Second, mechanisms of diverting out-of-plane impact to energy dissipation in the transverse direction are studied. The material distribution determines the area on plate where most energy is dissipated. It has been found that energy dissipation can spread transversely to a larger range on plate when the strength is lower, demonstrating competing effects between deformation capability and activation of inertia. By adding non-structural mass on plate, it has been found that it can influence range of plastic deformation as the result of the inertial effect. The mechanism has been verified by using a mass-spring model. These mechanisms revealed offer insights to diverting out-of-plane impact transversely on protection plate by using non-uniformly distributed mass and material properties to increase energy absorbing efficiency.

Influence of Flange Location on Axial Deformation Stability of Double-Hat Structure

Shape Optimization of H-Beam Flange for Maximum Plastic Energy Dissipation

Numerical Simulation Study on the Inertia-sensitiveness of Energy-absorbing Structures under Impact Loading

Hierarchical double-hat beam for axial crashworthiness

Innovative Design of Regular Unit-cell and Energy-absorbing Features under Impact of Polyhedron Sandwich Structure

Axial Crushing and Energy Absorption Integrated Design of Modular Filled Double-Hat Beam Composite Structures

Axial crashworthiness design of double-hat beams with various cross-sections

Design of hierarchical multi-cell double circular tubes thin-walled structures for energy absorption

Anti-impact and Energy-Absorption of Metal and Compound Thin-Wall Cylindrical Tubes

Topological study about failure behavior and energy absorption of honeycomb structures under various strain rates

Research on energy absorption characteristics of biconical snap-fit spatial self-locking thin-walled structure

Axial tensile test and design method of special-shaped rigid flange

Enhanced the impact resistance by gradient face-sheet design of a sandwich structure

Research on In-Plane Deformation Performance of Rotating Honeycomb Structures

Mechanisms of Diverting Out-of-plane Impact to Transverse Response in Plate Structures

Theoretical Analysis on the Collapse of Dumbbell-Shaped Tubes

Optimal Crashworthiness Design of a Spot-Welded Thin-Walled Hat Section

Frusta structure designing to improve quasi-static axial crushing performances of triangular tubes

New Method for Determining the Second Critical speed of Thin-wall Cylindrical Shells Under Axial Impact

Out-of-plane impact characteristics of missing rib-plate type anti-tri-chiral honeycomb

Experimental and numerical investigation on impact and post-impact behaviours of H-shaped steel members