Abstract:Time of flight diffraction (TOFD) technique and phased array ultrasonic testing (PAUT) have been developed rapidly in the last decades. They have shown the tendency to replace traditional volumetric weld inspection techniques, such as radiography and pulse-echo ultrasonic testing. The TOFD inspection with s ector can phased array not only retained the high positioning accuracy of TOFD technique, but also obtained higher detection sensitivity over the entire range of test piece thickness . In this paper, the model of a 48.0mm thick carbon steel weld was establis hed, n which the depth of defects was from 2.0mm to 46.0mm and the heigh t was from 1.0mm to 3.0mm. The TOFD technique combined with sector scan phased arra y method, i.e. PA-TOFD, was simulated based on the model with CIVA softwar e. A series of TOFD D scanning images under different sector scanning angles wer obtained and analyzed in one run. The echo amplitude and the positioning ac curacy of defects measured by PA-TOFD method were compared with that of conventio al TOFD technique respectively. Result shows that the PA-TOFD method can accurately determine the depth of defects by extracting the defect signals at favor ble angle, and the defects with different depths can achieve higher echo amplitude. This method has the advantages of phased array technique, such as beam steer ing, energy focusing, as well as the high positioning accuracy of TOFD technique. I t is significant for improving the reliability and efficiency of weld detection.

Time Resolution Improvement of Ultrasonic Tofd Testing by Pulse Compression Technique

Enhancing Ultrasonic Time-of-flight Diffraction Measurement Through an Adaptive Deconvolution Method

A Method to Avoid the Cycle-Skip Phenomenon in Time-of-flight Determination for Ultrasonic Flow Measurement

Resolution Enhancement in Ultrasonic TOFD Imaging by Combining Sparse Deconvolution and Synthetic Aperture Focusing Technique (Sparse-Saft)

Reducing Dead Zone in Ultrasonic Time-of-Flight Diffraction (TOFD): A Review

Ultrasonic TOFD technique and image enhancement based on synthetin aperture rousing technique

A Pulse Compression Technique for Improving the Temporal Resolution of Ultrasonic Testing

The System and Method of Ultrasonic Testing Based on Linear-Frequency-Modulation Technique

Enhancing Time-of-Flight Diffraction (TOFD) Inspection through an Innovative Curved-Sole Probe Design

A novel technique for improving of ultrasonic TOFD data

Weld Crack Testing Method Using Ultrasonic Tofd Technique

Time Resolution Improvement of Linear Chirp Excitation Ultrasonic Testing Based on Frequency-Phase-Amplitude Modulation Excitation

Enhancement of Time Resolution in Ultrasonic Time-of-Flight Diffraction Technique With Frequency-Domain Sparsity-Decomposability Inversion (FDSDI) Method

Ultrasonic Nondestructive Testing Accurate Sizing and Locating Technique Based on Time-of-Flight-Diffraction Method

A Research on Diffraction Characteristics of TOFD Probes by Performence Testing

Ultrasonic Time-of-Flight Diffraction Testing with Linear Frequency Modulated Excitation for Austenitic Stainless Steel Welds

Improved Hilbert Transform to Process the Ultrasonic TOFD Signal

Quantitative Detection of Shallow Subsurface Cracks in Pipeline with Time-of-flight Diffraction Technique

Ultrasonic TOFD Testing Model for Crack Measurement in Thick Wall Weldment

Shallow Buried Defect Testing Method Based on Ultrasonic TOFD

Study of PA-TOFD Inspection based on Numerical Simulation