Abstract:To analyze fragments formation situations of warhead shells different in thickness under high power explosive charge, this paper made numerical simulation of the effect of warhead shell thickness on fragments formation by the application of fragmentation warhead design software and AUTODYN-3D finite element software and did research on fragments' mass distribution, maximum initial velocity and penetration ability in real detonation environment by experiments. With the increase of warhead shell thickness, the total quantity of 50SiMnVB steel shell forming fragments decreases under high power explosive charge while the quantity of significant fragments whose mass over 1g increases. The change laws of initial velocity along warhead axis of different thickness shells forming fragments are accordant that the minimum initial velocity appears where approaching the initiation point and the maximum initial velocity appears where about 60% cylinder length away from the initiation point. Fragments' maximum initial velocity and shell thickness are negatively correlated. With the warhead shell thickness increasing from 5mm to 8mm, fragments' total number decreases by 39.1% and the significant fragments' quantity increases by 25.5%. Fragments' maximum initial velocity decreases by 27.9%. The quantity of fragments hitting target in per unit area decreases by 36.6% while its penetration probability increases obviously, reaching to 46.2%. In other words, the fragments' penetration ability is enhanced significantly.

Research on the Optimum Length–diameter Ratio of the Charge of a Multimode Warhead

Numerical Simulation on Low Ratio Length to Diameter Shaped Charge Warhead

The Effect Of Shell Configuration On The Formation Of Multimode Penetrators

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Research On The Rule Of Multi-Point Initiation Replacing Annulus Initiation Under Different Charge Caliber

The effect of annular multi-point initiation on the formation and penetration of an explosively formed penetrator

Numerical Simulation Research On The Formation Of Mefp

Transformation Mechanism of Dual-mode Penetrators Achieved by Changing of Single-point Detonation

Experimental Study on A New Model Shaped Charge Warhead

Numerical Simulation and Analysis of a Combined Shaped Charge

The Effect of Calculating Gridding Size on the Formation of Multimode Penetrator

The Effect of Explosive Material on the Formation of Explosively Formed Penetrator

Influence on Formation of Shaped Charge with a Center-hole

Grey Relation Analysis On Performance Parameters of Explosively Formed Penetrator

The Influence of Closed-Cell W-Shaped Liner Parameters on the Penetration Performance of Integral Annular Shaped Charge

Numerical Simulationand Analysis of a New Double Shaped Charge Liner Formed Penetrator

Effect Of Warhead Shell Thickness On Fragments' Formation And Penetration Performance

Numerical Simulation Study on Propellant Stability of Penetration Warhead

The Study on Penetration of Constant Kinetic Energy Long-rod Penetrator and Optimal Design

Orthogonal Optimization Design for Combined MEFP Warhead

Formation and Penetration Properties of a Shaped Charge with Zr41.2Ti13.8Cu12.5Ni10Be22.5 Liner