Abstract:Porous zinc oxide (ZnO) nanosheet (NS) arrays constructed by connected nanocrystallites were built on weaved metal wire (WMW) via hydrothermal treatment followed by calcination, and used as photoanodes for flexible dye-sensitized solar cells (DSSCs). An overall light-to-electricity conversion efficiency (h) of 2.70% was achieved for the DSSC under 100 mW cm(-2) illumination, and this h was found to be much higher than that of the DSSC with ZnO nanowire (NW) as the photoanode (0.71%). The far superior performance of the DSSC with ZnO-NS is essentially attributed to: (i) the film consisting of nanosheets with interconnected nanocrystallites can allow relatively direct pathways for the transportation of electrons as the nanosheets have a regular structure with the sheets being oriented to the electrode; (ii) the nanocrystallites assembly and porous character of the nanosheets can provide a large surface area for dye adsorption, which is in favor of enhancing the light absorption and the light propagation; (iii) the nanopores embedded in the nanosheet can act as "branch lines" for more efficient electrolyte diffusion into the interstice of the densely packed nanosheets in the array. A further improvement in the efficiency of the DSSC with ZnO-NS was achieved through the atomic layer deposition (ALD) of an ultrathin titanium oxide (TiO2) layer onto the ZnO-NS layer. The larger charge transfer resistance along with the introduction of a TiO2 shell is thought to reduce the surface recombination and thus contribute to the increase in the open circuit voltage (V-oc) of the DSCs and higher conversion efficiency (3.09%).

Integrated ZnO nanotube arrays as efficient dye-sensitized solar cells

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

A Comparable Study on the Arrays of Aligned ZnO Nanowires and TiO2 Nanotubes for Applications of Dye-sensitized Solar Cells

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

Hydrothermal Growth of ZnO Nanowires Scaffolds Within Mesoporous TiO2 Photoanodes for Dye-Sensitized Solar Cells with Enhanced Efficiency

Preparation of coaxial TiO2/ZnO nanotube arrays for high-efficiency photo-energy conversion applications

ZnO nanowires array grown on Ga-doped ZnO single crystal for dye-sensitized solar cells

Dye-sensitized solar cells based on ZnO nanowire array/TiO 2 nanoparticle composite photoelectrodes with controllable nanowire aspect ratio

Performance Comparison of Dye-Sensitized Solar Cells with Different ZnO Photoanodes

Research progress of nano ZnO materials in dye/quantum dot sensitized solar cells

Efficient Dye-Sensitized Solar Cells Based On Nanoflower-Like Zno Photoelectrode

ZnO/TiO 2 Core–shell Nanowire Arrays for Enhanced Dye-Sensitized Solar Cell Efficiency

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

A Zno/Tio2 Composite Nanorods Photoanode with Improved Performance for Dye-Sensitized Solar Cells

Comparison of ZnO and TiO2 Nanowires for Photoanode of Dye-Sensitized Solar Cells

ZnO/TiO2 Nanohexagon Arrays Heterojunction Photoanode for Enhancing Power Conversion Efficiency in Dye-Sensitized Solar Cells

Novel Bilayer Structure ZnO Based Photoanode for Enhancing Conversion Efficiency in Dye-Sensitized Solar Cells

A Novel Triple-Layer Zinc Oxide/carbon Nanotube Architecture for Dye-Sensitized Solar Cells with Excellent Power Conversion Efficiency

ZnO Nanoparticles and Nanowire Array Hybrid Photoanodes for Dye-Sensitized Solar Cells

Fabrication of dye-sensitized solar cells with ZnO nanorods as photoanode and natural dye extract as sensitizer