Abstract:In the traditional load model, motor and static loads are used to represent electrical equipment. However, since the electrical equipment using power electronic interface has accounted for a large proportion at present, the load components should be divided into motor, static load and power-electronic-interfaced load. The composition of the electric load is time-varying, and mastering the proportion of different load components is the key to establish an accurate load model. The existing load component proportion identification method identifies the key parameters of the load model and motor proportion parameters under large disturbances. However, the accuracy of this method is affected by the accuracy of load model parameters; moreover, it cannot identify the proportion of three types of load components. To this end, based on the analysis of different response characteristics of motor, static load and power-electronic-interfaced load under large disturbance, this paper proposes a load component proportion identification method based on dynamic response under large disturbance. This method first determines the proportion of static load according to the drop value of active power of load during the duration of large disturbance; then, the proportion of power-electronic-interfaced load is determined according to the separation results of motor response and the highest fitting accuracy; finally, the proportion of motor load can be calculated. The case study shows that the method does not depend on other parameters in the load model and has high identification accuracy.

Electric Load Modeling Based on Characteristic Fusion

Component Based On-line Modeling for Electric Loads

Online Synthetic Load Modeling System for Fujian Power Grid

Load Modeling with Considering Frequency Characteristic

Composite Load Models Based on Field Measurements and Their Applications in Dynamic Analysis

A new generalized load model of power systems and its applications

Load Modeling for Wide Area Power System

Electrical load modeling with considering distribution network

New method for on-line modelling of electric loads

Electric Load Modeling for Wide Area Power Systems

Modeling Methods for Electric Loads in a Real Power Grid

Load Modeling Including Air Conditioners

A Low-order Simplified Model of Power-electronic-interfaced Loads

Wide Area Electric Load Modeling Based on Smart Meter

Research Tendencies of Electric Load Modeling

Research on load model of VF based motor drive

Dynamic Characteristics and Modeling of Air Conditioner Loads

Feasibility Study on the Characterization of Electric Load including Inverter Air Conditioner with a Synthetic Load Model

Load Clustering and Synthetic Modeling Based on Daily Load Curves

Identification of a composite load model with applications

Identification Method of the Load Component Proportion Based on the Dynamic Response under Large Disturbance