Abstract:In this study, an atomistically informed constitutive term representing microscopic scaled contraction is correlated and implemented to elucidate macroscopic sintering deformation induced by thermal stress in co-sintered anode-support half-cell of solid oxide fuel cell (SOFC). Molecular dynamics (MD) method is developed for a selected domain of porous anode and dense electrolyte layer from the half-cell, aiming to understand the microscopical contraction mechanisms during the sintering process and relation with particle aggregation/neck growth. It is found that both thermal effect and driving force of attraction between the neighboring atoms at high temperatures play a significant role to result in domain volume change. When sintered porous morphology is formed, positions and structures of the particles are stabilized, the sintering contraction becomes slower. This microscopic volume change is quantified along the length direction and further correlated as an intrinsic strain term representing macroscopic contraction property, which is also incorporated with thermal strain and elastic strain. A macroscopic half-cell model is developed and applied for co-sintering of SOFC thick anode and thin electrolyte layer, aiming to analyze dynamic deformation phenomenon experimentally observed during heating, insulation and cooling (the so-called temperature-increasing, -insulation and -decreasing, respectively) stages. It is revealed that, during the initial heating stage, a pronounced thermal expansion effect is observed. As into the insulation stage, the contraction characteristics become prominent. Further during the cooling stage, cell deformation stabilizes. This trans-scale modeling approach provides valuable insights for optimizing deformation and stress concentration during the co-sintering process of SOFC cell.

Constrained Sintering of Y2O3-stabilized ZrO2 Electrolyte on Anode Substrate

Co-sintering anode and Y 2O 3 stabilized ZrO 2 thin electrolyte film for solid oxide fuel cell fabricated by co-tape casting

Microstructure and electrochemical characterization of solid oxide fuel cells fabricated by co-tape casting

Performance Evaluation of Thin Membranes Solid Oxide Fuel Cell Prepared by Pressure-Assisted Slurry-Casting

Fabrication and evaluation of anode and thin Y2O3-stabilized ZrO2 film by co-tape casting and co-firing technique

Study on the Properties of Ysz Electrolyte Made by Plaster Casting Method and the Applications in Solid Oxide Fuel Cells

Effect of co-sintering temperature on the performance of SOFC with YSZ electrolyte thin films fabricated by dip-coating method

Sintering Process Simulation of a Solid Oxide Fuel Cell Anode and Its Predicted Thermophysical Properties

Effect of NiO/YSZ Compositions on the Co-Sintering Process of Anode-Supported Fuel Cell

Fabrication and Properties of Anode-Supported Solid Oxide Fuel Cell

Research on Sintering Process of YSZ Electrolyte

Performance Evaluation of Solid Oxide Fuel Cells with Thin Film Electrolyte Fabricated by Binder‐Assisted Slurry Casting

Effect of Pre-Sintering Treatment of Anode Substrate on the Densification and Flatness of Ysz Electrolyte by Suspension Spray

Fabrication and Characterization of Ni-SSZ Gradient Anodes/ssz Electrolyte for Anode-Supported SOFCs by Tape Casting and Co-Sintering Technique

Fabrication and Characterization of Ni-SSZ/SSZ/LSM-SSZ Anode-Supported SOFCs by Tape Casting and Single-Step Co-Sintering Techniques

Coarse-grained molecular dynamics modeling and analysis of graded porous electrodes of reversible solid oxide cells sintered in two steps

Effect of densification processes on the properties of plasma-sprayed YSZ electrolyte coatings for solid oxide fuel cells

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

Fabrication, Microstructure and Properties of A Ysz Electrolyte for Sofcs

Modeling of Solid Oxide Fuel Cell Sintering Stress and Deformation

Preparation and Performance of Solid Oxide Fuel Cells with YSZ/SDC Bilayer Electrolyte