Abstract:Tungsten oxide (WO3) is a strong candidate as the photoanode in photoelectrochemical (PEC) water splitting owing to its moderate band gap (2.6–3.2 eV) for wide light absorption and stable physicochemical properties. This work reports a morphology engineering strategy to fabricate voltage-induced terrace-like tungsten oxide (TW) film and its high-voltage performance as a photoanode for PEC water splitting. By controlling the anodization voltage, the morphology of the anodic WO3 film was altered, and their photoelectrochemical performances were compared. Anodization of the tungsten film in fluoride-containing H3PO4 leads to the growth of either irregular porous tungsten oxide layers or terrace-like tungsten oxide layers, depending on the anodic potentials. The possible growth mechanism of the porous oxide layer during anodization is proposed with a combination of the field-assisted dissolution model and the oxygen-bubble mold model. Under light irradiation, the photocurrent density was 3.0 mA cm–2 at 1.23 V vs RHE (VRHE) for annealed terrace-like WO3, which was almost 3 times larger than that of annealed porous WO3. As a photoanode, terrace-like WO3 films could generate hydrogen at 58 μmol cm–2 h–1 under simulated solar light, while porous WO3 films produced hydrogen with a slower rate of 28 μmol cm–2 h–1. The terrace-like WO3 films experience higher photoelectrochemical performance and incident photon-to-electron conversion efficiency (IPCE) than porous WO3 due to more regular nanostructure, smaller band gap, fast charge-transfer rate, and alleviated recombination rate. This study shows that morphology control can effectively enhance the photocurrent density and IPCE of photoanodes and suggests a practical direction for finding the optimal WO3 films for PEC water splitting.

Enhancing photoelectrochemical activity of nanocrystalline WO 3 electrodes by surface tuning with Fe(III)

Enhanced Photoelectrochemical Water Splitting on Novel Nanoflake WO3 Electrodes by Dealloying of Amorphous Fe–W Alloys

Wo3 Nanoflakes for Enhanced Photoelectrochemical Conversion

Facile Synthesis of a Micro–Nano-Structured FeOOH/BiVO4/WO3 Photoanode with Enhanced Photoelectrochemical Performance

Enhanced Photocurrent–voltage Characteristics of WO3/Fe2O3 Nano-Electrodes

Composites Based on Electrodeposited WO3 and TiO2 Nanoparticles for Photoelectrochemical Water Splitting

Highly Enhanced Photoelectrocatalytic Properties by Α-Fe 2 O 3 Modified NF-TiO 2 Pyramids with Dominant (101) Facets

Efficient Photoelectrochemical Water Splitting and Impedance Analysis of WO3−x Nanoflake Electrodes

Enhanced Photoelectrochemical Water Oxidation on WO3 Nanoflake Films by Coupling with Amorphous TiO2

WO3@α‐Fe2O3 Heterojunction Arrays with Improved Photoelectrochemical Behavior for Neutral Ph Water Splitting

One-Step Rapid and Scalable Flame Synthesis of Efficient WO3 Photoanodes for Water Splitting.

High-Voltage Etching-Induced Terrace-like WO 3 Photoanode for Efficient Photoelectrochemical Water Splitting

New aspects of improving the performance of WO3 thin films for photoelectrochemical water splitting by tuning the ultrathin depletion region

Photoelectrochemical Water Oxidation Performance of Α-Fe2o3 Enhanced by Sn Doping and Feooh Modification

Enhanced Performance of Photoelectrochemical Water Splitting with ITO@α-Fe2O3 Core–Shell Nanowire Array As Photoanode

Surface Engineered Doping of Hematite Nanorod Arrays for Improved Photoelectrochemical Water Splitting

Novel Nanostructured WO 3 @Prussian Blue Heterojunction Photoanodes for Efficient Photoelectrochemical Water Splitting

Preparation of well-aligned WO 3 nanoflake arrays vertically grown on tungsten substrate as photoanode for photoelectrochemical water splitting

Improved Photocatalytic Water Splitting Activity of Highly Porous WO3 Photoanodes by Electrochemical H+ Intercalation

In situ fabrication of WO3/CuWO4/CuO heterojunction photoanode for boosted interfacial charge transfer and enhanced photoelectrochemical water splitting

Tuning nanosheet Fe<sub>2</sub>O<sub>3</sub> photoanodes with C<sub>3</sub>N<sub>4</sub> and p-type CoO<sub>x</sub> decoration for efficient and stable water splitting