Abstract:Highly efficient non-Pt electrocatalysts for the alkaline hydrogen oxidation reaction (HOR) are required to enable complete replacement of Pt in hydroxide exchange membrane fuel cells (HEMFCs). Herein, we report a facile synthesis of a series of 2.4–2.9 nm Pd1−xIrx (x = 0.33, 0.50, 0.67, 0.75, 0.80, 0.91) alloy nanoparticles (NPs) evenly distributed on nitrogen-doped carbon (N-C) via simple chemical reduction of aqueous metallic complexes by sodium borohydride (NaBH4) in the absence of surfactants. The Ir component of alloy NPs and the nitrogen dopants of the carbon matrix contribute to the particle size control and uniform distribution. Remarkably, the resultant Pd0.33Ir0.67/N-C exhibits an exceptional alkaline HOR activity, measured as mass specific exchange current density (j0,m), that is 1.4 times that of commercial Pt/C. CO stripping shows that Pd0.33Ir0.67/N-C has an electrochemical active surface area (ECSA) of 106 m2 gmetal−1 that is 1.2 times that of commercial Pt/C, partially explaining the increased activity. Furthermore, density functional theory (DFT) demonstrates an appropriate strength of hydrogen binding of Pd0.33Ir0.67, which is consistent with cyclic voltammetry (CV) measurements. In addition, DFT shows that Pd0.33Ir0.67 possesses the highest oxophilic property among all of the Pd1−xIrx electrocatalysts. We conclude that the high ECSA, appropriate strength of hydrogen binding, and the strong oxophilic property collectively account for the remarkable activity of Pd0.33Ir0.67/N-C. The latter two factors should be closely correlated with the electronic effect between Pd and Ir as evidenced by X-ray photoelectron spectroscopy (XPS). A single cell fabricated with Pd0.33Ir0.67/N-C as the anode approaches a peak power density of 514 mW cm−2 that is 1.3 times that of commercial Pt/C. This study demonstrates the substitution of commercial Pt/C with a non-Pt electrocatalyst at the anode of the single cell of HEMFCs with enhanced performance.

Pd Modified Mmni50.6co10.2mn5.4al1.2 Alloy As The Catalyst Of Nabh4 Electrooxidation

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

Boron-Doped PdCuAu Nanospine Assembly As an Efficient Electrocatalyst Toward Formic Acid Oxidation

An Effective Pd@Ni-B/C Anode Catalyst for Electro-Oxidation of Formic Acid

Electrochemical Properties of Rare-Earth Based Hydrogen Storage Alloy for Replacing Pt As the Anode Electrocatalyst in AFC

High Electrocatalytic Activity for Borohydride Oxidation on Palladium Nanocubes Enclosed by {200} Facets

Novel-Phase Structural High-Efficiency Anode Catalyst for Methanol Fuel Cells: Α-(Nicu)3pd Nanoalloy

Anodic Oxidation of Alkali Borohydrides Catalyzed by Nickel

Electrocatalysts for the Anodic Oxidation of Borohydrides

Hydrogen storage alloys as the anode materials of the direct borohydride fuel cell

Investigation of PtNi/C anode electrocatalysts for direct borohydride fuel cell

Reduced Graphene Oxide Foam Supported CoNi Nanosheets As an Efficient Anode Catalyst for Direct Borohydride Hydrogen Peroxide Fuel Cell

Carbon Supported Cu-Pd Nanoparticles As Anode Catalyst For Direct Borohydride-Hydrogen Peroxide Fuel Cells

An Efficient Ni-P Amorphous Alloy Electrocatalyst With A Hierarchical Structure Toward Borohydride Oxidation

Nickel Promoted Palladium Nanoparticles for Electrocatalysis of Carbohydrazide Oxidation Reaction

Preparation of Pd-Ag/C@Tio2 Core/Shell Nanorods As Catalysts for Electrooxidation of Nabh4

Electrocatalytic Properties of Pd Modified Pt/C Catalysts for Proton Exchange Membrane Fuel Cell

Pd Nanoparticles Support on Rgo-C@tic Coaxial Nanowires As a Novel 3D Electrode for NaBH4 Electrooxidation

Investigation of Carbon-Supported Ni@Ag Core-Shell Nanoparticles As Electrocatalyst for Electrooxidation of Sodium Borohydride

Uniform Pd0.33Ir0.67 nanoparticles supported on nitrogen-doped carbon with remarkable activity toward the alkaline hydrogen oxidation reaction

Stable Bimetallene Hydride Boosts Anodic CO Tolerance of Fuel Cells