Abstract:Conventional stator–magnet moving-iron transverse-flux linear oscillatory machines (CSMTLOMs) are widely applied in directly-drive reciprocating devices due to the merits of easy fabrication and robust mover. However, in order to keep the mover vibrating at a certain resonance frequency to save the energy and enlarge the output power, they still suffer from a higher requirement on spring stiffness due to their thick and heavy mover core, which would also narrow the frequency band with a high power factor due to the large inertial energy storage of the heavy mover. Hence, to reduce the mover core weight to reduce the demand of the spring and improve the operation performance, an improved linear oscillatory machine featured by a spoke-type interior permanent magnet inner stator (ISMTLOM) is proposed. Benefiting from its separated two stators, the tangential flux in the radial plane can return through the inner stator core, so that the yoke of the mover core can be eliminated directly. Then, to analytically investigate the influence of the special axial local saturation effect, the segmental equivalent magnetic circuit (EMC) model of the ISMTLOM is established, wherein a saturation coefficient is introduced to quantitatively consider the local saturation effect on the output force. Consequently, several important size parameters are optimally selected when keeping the same outer diameter and copper loss as that of the CSMTLOM. Afterward, the three-dimension finite element algorithm (3D FEA) is adopted for the electromagnetic performance validation and comparison. Finally, it is found that the nonlinear segmental EMC corrected by the saturation coefficient can quickly predict the output force more accurately within the wide load range, and benefiting from the topology improvement, the ISMTLOM has the merits over the CSMTLOM in its smoother output force, much lighter mover core, and less demand of mechanical spring stiffness, whilst preserving the similar output force density.

Performance simulation and experiment research on moving-magnet linear oscillation motor

Multi-Structural Optimization of Bearingless Permanent Magnet Slice Motor Based on Virtual Prototype in Ansoft Maxwell

Investigation of Forces in Linear Induction Motor under Different Slip Frequency for Low-Speed Maglev Application

Design and Test on Moving-Magnet Linear Compressor

Modeling and Analysis of Moving-Magnet Transverse-Flux Linear Oscillatory Motor

Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

A STUDY ON CHARACTERISTIC OF MOVING MAGNET TYPE LINEAR OSCILLATORY MOTOR

Research on the Mathematics Model of a Permanent Magnet Linear Oscillatory Actuator with Moving Iron and Non-Salient Pole

Performance Investigation of a Novel Multi-Tooth Switched-Flux Linear Motor

Mathematcial Model of Moving-magnet Linear Oscillatory Motor

Thrust Ripple Optimization and Experiment for a Permanent Magnet Linear Synchronous Motor

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Research on a moving-magnet linear oscillatory actuator with double stators and its application

The Dynamic Performance Analysis Model of EMS-MAGLEV System Utilizing Coupled Field-Circuit-Movement Finite Element Method

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Electromagnetic Design and Analysis of a Stator–Magnet Transverse Flux Linear Oscillatory Machine with Yokeless Mover Core

Detent Force Analysis and Optimization of Permanent Magnet Linear Synchronous Motor

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Design and Test of a Less-Rare-Earth Stator-Magnet Moving-Iron Transverse-Flux Linear Oscillatory Machine for Reciprocating Drive