Abstract:Latent heat storage is one of the most efficient ways of storing thermal energy. Organic phase change materials are latent heat storage materials and they have been widely used as suitable materials for thermal energy storage applications due to their high latent heat and small temperature difference between storing and releasing heat. In this thesis, micro- and nano- scaled phase change materials were fabricated for thermal energy storage. A novel microencapsulated phase change material slurry (MPCS) was introduced by dispersing microencapsulated phase change materials (MEPCMs) into water with an amount of surfactants and its thermal and rheological properties were also investigated. The results showed that MPCS fabricated in the current research are suitable for potential application as heat transfer media in the thermal energy storage. A new methodology was proposed to investigate the heat transfer characteristics of MPCSs. Experiments were carried out in laminar, transition and turbulent flow for MPCSs in a circular tube under constant heat flux, respectively. The experimental results demonstrated that in comparison to water as a heat transfer fluid at the same flow rate, the heat transfer of 10 wt. % MPCS could be enhanced by 10 % in transition flow condition while the PCM particles were in solid/liquid state, and the heat transfer of 5 wt. % MPCS could be enhanced by 21.9 % and 19.2 % in turbulent flow condition while the PCMs are in solid and solid/liquid states, respectively. Nevertheless, the heat transfer enhancement depends on the combination factors, including concentration of the slurry and flow rate of the slurry. A novel heat transfer fluid containing microencapsulated phase change material and multi-walled carbon nanotubes was prepared. The results showed that addition of MWCNTs to microencapsulated phase change material slurry can effectively improve the thermal conductivity of suspensions and it is also found that a blend of 10 wt. % MEPCM and 1 wt. % MWCNTs suspension can achieve the best thermal performance and stability among other blends in the experiment. A novel nanocapsule containing n-octadecane with an average 50 nm thick shell of poly (ethyl methacrylate) (PEMA), and with a core/shell weight ratio of 80/20 was synthesized by direct miniemulsion method. The results showed that PEMA/octadecane nanocapsule had good thermo-physical properties and had much higher encapsulation ratio (89.5%) and encapsulation efficiency (88.9%). For the first time, a novel PCM nanoparticle suspension (nano-PCS) was synthesized by direct miniemulsion method for thermal energy system application. It was found that the nano-PCSs had good thermo-physical properties and durability. All nano-PCSs presented narrow size distribution and stable particles. In comparison to the convectional PCM emulsion and MPCS, the nano-PCS tends to be more stable and is much easier and cheaper to fabricate in terms of the method and materials used, however, the heat transfer characteristics of the nano-PCS require further experimental investigation

Experimental evaluation on natural convection heat transfer of microencapsulated phase change materials slurry in a rectangular heat storage tank

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Heat Transfer During Constrained Melting of Nano-Enhanced Phase Change Materials in A Spherical Capsule: an Experimental Study

An Experimental Investigation of Constrained Melting Heat Transfer of Nano-Enhanced Phase Change Materials in a Horizontal Cylindrical Capsule Using Thermochromic Liquid Crystal Thermography

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in Laminar Flow under Constant Heat Flux

Experimental Investigation of the Viscosity and Density of Microencapsulated Phase Change Material Slurries for Enhanced Heat Capacity and Transfer

EXPERIMENTAL RESEARCH ON LAMINAR FORCED CONVECTION HEAT TRANSFER CHARACTERISTICS OF MICROENCAPSULATED PHASE CHANGE MATERIAL SUSPENSION

Flow and Heat Transfer Characteristics of Micro-encapsulated Phase Change Material Slurry and Energy Transport Evaluation

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Numerical Investigation on Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in a Rectangular Minichannel

Flow and heat transfer behaviors of phase change material slurries in a horizontal circular tube

Preparation, Heat Transfer and Flow Properties of Microencapsulated Phase Change Materials for Thermal Energy Storage

Experimental and Photothermal Performance Evaluation of Multi-Wall Carbon-Nanotube-Enhanced Microencapsulation Phase Change Slurry for Efficient Photothermal Conversion and Storage

Heat transfer of microencapsulated PCM slurry flow in a circular tube

Thermal and rheological properties of microencapsulated phase change materials

Experimental Investigations of Heat Transfer Characteristics of MPCM During Charging

Experimental Investigation On Laminar Forced Convection Heat Transfer Enhancement Of Microencapsulated Phase Change Suspension With Constant Heat Flux

An Experimental Study of the Latent Functionally Thermal Fluid with Micro-Encapsulated Phase Change Material Particles Flowing in Microchannels

Preparation and heat transfer characteristics of microencapsulated phase change material slurry: A review

Fabrication, Characterization and Thermo-Physical Properties of Micro- and Nano- Scaled Phase Change Materials for Thermal Energy Storage