Abstract:Permafrost degradation negatively affects the thermal stability of northern infrastructure. The quantification of heat loss through a buried oil pipeline is imperative to determine the thermal interaction between the pipe and underlying permafrost. However, the magnitudes and patterns of heat flux have not been studied methodically. This study quantifies how lateral and vertical heat fluxes from a buried warm oil pipeline increase the permafrost thawing rate and promote talik (i.e., bodies or layers of unfrozen ground in permafrost areas) development in subarctic regions by employing a three-dimensional conductive heat transfer model. In addition, the sensitivity of daily and annual heat fluxes to insulation thickness and its thermal conductivity was determined. Simulated results indicate that the heated oil pipeline acts as a heat source with the maximum daily heat flux of 6.7 W/m2 and maximum annual heat flux of 4.3 W/m2. The mean annual heat flux exponentially decreases with increasing insulation thickness, while have a logarithmical increase with the increase of the thermal conductivity of insulation material. For an insulated (0.04-m thickness) oil pipeline, a fast-growing talik initiates and enlarges laterally and vertically over time. By contrast, two-phase closed thermosyphons can be used as a remedying measure to mitigate the accelerated permafrost thaw around a buried oil pipeline. Thermosyphons increase the lateral daily heat flux by an average of 0.5 W/m2 and lower mean annual soil temperature at depth by an average of 2 °C. Within the context of climate warming, we expect that talik beneath the oil pipeline will enlarge faster than previously estimated in the coming decades due to the adverse effects of the subsurface water flow. The net founding of our results is applicable to improve the engineered design and assess the vulnerability of the oil pipeline in cold regions.

Thermal Impact of the Parallel Laying of Oil/gas Pipelines

Analyses on Heating Energy Saving of Two Hot Waxy-Crude Oil Pipelines Laid Parallel in One Ditch

Impacts of Different Diameter Combinations on the Temperature of a Crude Oil Pipeline when Colocating with a Products Pipeline

Theoretical Analysis and Numerical Simulation of Large-Diameter and Thin-Wall Pipelines During Ultra-Deep J-Lay Installation

Investigation into the Heat Transfer Models for the Hot Crude Oil Transportation in a Long‐buried Pipeline

Numerical Study on the Optimal Thermally Affected Region of a Buried Oil Pipeline

Numerical Simulation of a Buried Hot Crude Oil Pipeline under Normal Operation

Thermal Simulation Calculation of Underground Oil Pipeline at Starting

Heat transfer characteristics of oil-water two-phase in pipeline transportation during shutdown

Parametric study on the mechanical behavior of submarine pipeline for deepwater S-lay operation

Characteristics of heat fluxes of an oil pipeline armed with thermosyphons in permafrost regions

Progress and Review on Numerical Calculation for Soil Temperature Field around Underground Oil Pipelines

Three-Dimensional CFD Modeling on the Thermal Characteristics of Buried Oil Pipeline Involving the Heat Transfer of Wax Layer

THE INFLUENCE OF AMBIENT TEMPERATURE AND PREHEATING WATER TEMPERTURE ON TEMPERATURE FIELD OF SOIL DURING PREHEATING BURIED HOT CRUDE OIL PIPELINE FOR STARTUP

Experimental study on wax deposition of highly paraffinic oil in intermittent gas-oil flow in pipelines

Numerical study on the impact distance of a jet fire following the rupture of a natural gas pipeline

Heat Transfer Simulation Study of Hot Oil Tubes Based on COMSOL

Study on permafrost thermal stability and disturbance of the Mohe-Daqing oil pipe and its accompanying road of China-Russia Crude Oil Pipeline

Establishment and Application of Heat Flow Coupling Model

Numerical evaluation of the coupled/uncoupled effectiveness of a fluid-solid-thermal multi-field model for a long-distance energy transmission pipeline

Evaluation the effect of the ambient temperature on the liquid petroleum gas transportation pipeline