Abstract:Flame-retardant polypropylene (PP) samples were in situ compatibilized with maleic anhydride grafted PP. Compatibilization reaction was verified by an IR spectrum and gel content measurements. Electron microscopy images showed that compatibilization could considerably reduce the size of the flame-retardant domains, control the phase morphology, and improve the interfacial adhesion between PP and intumescent flame retardant (IFR) with different IFR loading levels. The limiting oxygen index (LOI) of flame-retardant PP increased to different extents after compatibilization, indicating an improvement in the flame retardancy. Compatibilization enhanced the thermal stability to some extent and remarkably delayed thermal oxidative degradation of flame-retardant PP. For PP containing 20 wt % flame retardant, the temperature at which the maximum weight loss rate occurred was enhanced by about 99 degrees C after compatibilization. The storage modulus and glass transition temperatures were elevated to different extents. Tensile strengths of samples reduced in the presence of flame retardant alone but in the additional presence of compatibilizer were restored to levels similar to those of pure PP. Elongation-at-break values, however, showed IFR concentration-dependent reductions that were less for compatibilized samples. Furthermore, the complex viscosity of a compatibilized PP melt turned slightly smaller, which is favorable to melt processing.

Synergistic effect of polyhedral oligomeric silsesquioxane on the flame retardancy and thermal degradation of intumescent flame retardant polylactide

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

The mechanical properties and thermal performances of polypropylene with a novel intumescent flame retardant

Synergistic Effect of Poss on Mechanical Properties, Flammability, and Thermal Degradation of Intumescent Flame Retardant Polylactide Composites

Effects of reactive compatibilization on the morphological, thermal, mechanical, and rheological properties of intumescent flame-retardant polypropylene.

Flame retardancy and thermal degradation behaviors of phosphate in combination with POSS in polylactide composites

Combustion Properties and Thermal Degradation Behavior of Polylactide with an Effective Intumescent Flame Retardant

Study on flame-retardancy and thermal degradation behaviors of intumescent flame-retardant polylactide systems

Flame-retardant and Anti-dripping Properties of Intumescent Flame-retardant Polylactide with Different Synergists

The encapsulation of intumescent flame retardants by poly-siloxane for thermoplastic polyolefin: Fire safety and water resistance

Synergistic Effect Of Lanthanum Oxide On Intumescent Flame-Retardant Polypropylene-Based Formulations

Study on Thermal Property, Flame Retardancy and Mechanism of Poly(lactic Acid)/intumescent Flame Retardant/NiAl Layer Double Hydroxide Nanocomposites

Preparation of Lignin–silica Hybrids and Its Application in Intumescent Flame-Retardant Poly(lactic Acid) System

Synergistic Flame Retardant Properties of Polyoxymethylene with Surface Modified Intumescent Flame Retardant and Calcium Carbonate

Combustion and Thermal Properties of Polylactide with an Effective Phosphate-Containing Flame-Retardant Oligomer

The fire performance of polylactic acid containing a novel intumescent flame retardant and intercalated layered double hydroxides

Study on Effect of Polydimethylsiloxane in Intumescent Flame Retardant Polypropylene

The effect of different organic modified montmorillonites (OMMTs) on the thermal properties and flammability of PLA/MCAPP/lignin systems

Flame Retardancy and Thermal Degradation of Intumescent Flame Retardant Poly(Lactic Acid)/Starch Biocomposites

Preparation of a halogen-free flame retardant and its effect on the poly(L-lactic acid) as the flame retardant material

Flame Retardancy and Thermal Degradation of Intumescent Flame Retardant Polypropylene with Mp/Tpmp