Abstract:The liquid water produced by an electrochemical reaction at the cathode of a proton exchange membrane fuel cell blocks the pores in the gas diffusion layer, resulting in “water flooding.” At the same time, membrane dehydration leads to serious ohmic polarization. Discharging liquid water from the stack as soon as possible to ensure the wetting of the proton exchange membrane is a key problem. A membrane humidifier is a key component of a proton exchange membrane fuel cell system for water and thermal management. By considering coupling with the working conditions of a fuel cell, systematic sensitivity simulation analysis of the operating and geometric parameters of the membrane humidifier was carried out. The steady-state mathematical model of the membrane humidifier was established based on Matlab/Simulink. The influences of the inlet mass flow rate, temperature, and pressure, membrane thickness and area on heat transfer, water transfer, relative humidity, and water transfer rate of the membrane humidifier on the wet and dry sides were analyzed. The main conclusions are as follows: Improving the inlet mass flow rate can effectively improve the heat transfer and water transfer quantity, yet reduces the water transfer rate and the relative humidity at the drying side outlet. The increase in temperature on both dry and wet sides can improve the diffusion coefficient and transfer capacity of water in the membrane; however, high temperature significantly increases the saturation pressure of water vapor, reduce water activity, and then reduce the water content of the membrane, which is not conducive for water transfer. The change in pressure has little effect on heat transfer; however, an increase in the total pressure reduces the inlet moisture content and water transfer capacity while increasing the water transfer rate. A larger membrane area and a lower membrane thickness can improve the film moisture transfer and water transfer rates, which can effectively improve the membrane humidifier and fuel cell system hydrothermal management performance.

Optimizing the Relative Humidity to Improve the Stability of a Proton Exchange Membrane by Segmented Fuel Cell Technology

Study of Relative Humidity on Durability of the Reversal Tolerant Proton Exchange Membrane Fuel Cell Anode Using a Segmented Cell

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Performance of a Membrane Humidifier for a Proton Exchange Membrane Fuel Cell

Hydrophobic Modification of Flow Channel Surface and Its Effect on the Performance of Proton Exchange Membrane Fuel Cell

Optimization of Reactants Relative Humidity for High Performance of Polymer Electrolyte Membrane Fuel Cells with Co-Flow and Counter-Flow Configurations

Numerical studies of liquid water behaviors in PEM fuel cell cathode considering transport across different porous layers

Humidification Effects of Proton Exchange Membrane Fuel Cell with Conventional and Interdigitated Flow Field

Uncoupling Characteristics Of Temperature And Relative Humidity Distribution In A Commercial-Size Polymer Electrolyte Membrane Fuel Cell

Numerical and Experimental Investigation of the Asymmetric Humidification and Dynamic Temperature in Proton Exchange Membrane Fuel Cell

In-Situ Measurement of Humidity Distribution and Its Effect on the Performance of a Proton Exchange Membrane Fuel Cell

Experimental Investigation for the Influence Mechanism of Air Intake Method and Humidity Level on Performance of Proton Exchange Membrane Fuel Cells

Moisture Dehumidification and Its Application to a 3 Kw Proton Exchange Membrane Fuel Cell Stack

Proton Exchange Membrane Fuel Cell with Humidifying Zone

Effects of Humidification Temperatures on Local Current Characteristics in a PEM Fuel Cell

In situ investigation of proton exchange membrane fuel cell performance with novel segmented cell design and a two-phase flow model

An EIS approach to quantify the effects of inlet air relative humidity on the performance of proton exchange membrane fuel cells: A pathway to developing a novel fault diagnostic method

A Breakthrough Performance Improvement in a Proton Exchange Membrane Fuel Cell Stack by Moisture Coil Cooling

Low Humidification Effect on Performance of Proton Exchange Membrane Fuel Cells under High Current Density Conditions

Effect of Wide Reactant Relative Humidity on PEMFC Electrochemical and Thermodynamic Performance from Both Global and Local Perspectives

Effect Of Humidified Water Vapor On Heat Balance Management In A Proton Exchange Membrane Fuel Cell Stack